Kingsburg · Zoning · IH
Kingsburg IH zoning: height, setbacks and lot size
In Kingsburg's IH zone, generally buildings can be up to 75 ft tall and the front setback is 10 ft, with the conditions listed below (Kingsburg code, read October 2026).
Key points
- Maximum building height: 75 ft (greater height may be approved for tanks, towers and silos; up to 200 ft in the IH zone one mile from the central business district)
- Minimum front setback: 10 ft
- Minimum side setback: None required
- Minimum rear setback: None required
IH (Heavy Industrial) is a zoning district in Kingsburg. Every value below was read from the Kingsburg Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in IH
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 75 ft Applies: greater height may be approved for tanks, towers and silos; up to 200 ft in the IH zone one mile from the central business district § 17.44.050 · code textNo greater than seventy-five (75) feet, except that a greater height may be approved for tanks, towers, silos and similar facilities under the provisions of Chapter 17.68; and except that a height of no greater than two hundred (200) feet shall be permitted for a site in the IH (Heavy Industrial) zone district at least one mile away from the central business district. |
|---|---|
| Minimum front setback | 10 ft § 17.44.050 · code textThe minimum front yard for both the IL and IH districts shall be ten (10) feet. |
| Minimum side setback | None required § 17.44.050 · code textExcept as provided below, no rear or side yards shall be required: |
| Minimum rear setback | None required § 17.44.050 · code textExcept as provided below, no rear or side yards shall be required: |
When a different number applies
The code sets other values for particular lots, buildings or locations in IH:
- Maximum building height: 200 ft — site at least one mile away from the central business district § 17.44.050
- Minimum side setback: 15 ft — abutting a UR, RCO, RA, R, RM, PO, or C district § 17.44.050
- Minimum rear setback: 15 ft — abutting a UR, RCO, RA, R, RM, PO, or C district § 17.44.050
Not on this page
We did not find a general stories, lot size, lot coverage, FAR, density limit for IH in the zoning tables we read. The code may still set one elsewhere — check the Kingsburg Municipal Code.
Other Kingsburg zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Kingsburg's IH zone?
75 ft (greater height may be approved for tanks, towers and silos; up to 200 ft in the IH zone one mile from the central business district) — Kingsburg Municipal Code § 17.44.050.
What is the minimum front setback in Kingsburg's IH zone?
10 ft — Kingsburg Municipal Code § 17.44.050.
What is the minimum side setback in Kingsburg's IH zone?
None required — Kingsburg Municipal Code § 17.44.050.
What is the minimum rear setback in Kingsburg's IH zone?
None required — Kingsburg Municipal Code § 17.44.050.
General information, not legal advice.
Ask about a Kingsburg property in IH
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question