Huntington Park · Zoning · R-H
Huntington Park R-H zoning: height, setbacks and lot size
In Huntington Park's R-H zone, generally buildings can be up to 45 ft tall, the front setback is 10 ft and the minimum lot size is 15,000 sq ft, with the conditions listed below (Huntington Park code, read October 2026).
Key points
- Maximum building height: 45 ft
- Minimum front setback: 10 ft (garage doors for single-family uses must be at least 20 ft from the front property line)
- Minimum side setback: 4 ft plus 1 ft for each story over 1 story
- Minimum rear setback: 10 ft
- Minimum lot size: 15,000 sq ft (Lots created before January 1, 2019 containing no more than one dwelling unit are exempt from the minimum lot size standards.)
- Maximum lot coverage: 65%
- Maximum density: 20.0 units per acre
R-H is a zoning district in Huntington Park. Every value below was read from the Huntington Park Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in R-H
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 45 ft § 9-4.103 · code textTable row “Main Structure Height (maximum)”, column “R-H”: 45 feet |
|---|---|
| Minimum front setback | 10 ft Applies: garage doors for single-family uses must be at least 20 ft from the front property line § 9-4.103 · code textTable row “Front Setback (feet)”, column “R-H”: 10 1 |
| Minimum side setback | 4 ft plus 1 ft for each story over 1 story § 9-4.103 · code textTable row “Side Setback (each)”, column “R-H”: 4 feet plus 1 foot for each story over 1 story |
| Minimum rear setback | 10 ft § 9-4.103 · code textTable row “Rear Setback (feet)”, column “R-H”: 10 |
| Minimum lot size | 15,000 sq ft Applies: Lots created before January 1, 2019 containing no more than one dwelling unit are exempt from the minimum lot size standards. § 9-4.103 · code textTable row “Lot Area (square feet)”, column “R-H”: 15,000 * |
| Maximum lot coverage | 65% § 9-4.103 · code textTable row “Lot Coverage (Building Footprint) (percent, maximum)”, column “R-H”: 65% |
| Maximum density | 20.0 units per acre § 9-4.103 · code textTable row “Maximum Units/Acre”, column “R-H”: 20.0 |
When a different number applies
The code sets other values for particular lots, buildings or locations in R-H:
- Maximum building height: 100 ft — only with Commission approval in a Development Permit, while meeting standard setbacks; needs visual analysis, shown need and architectural compatibility § 9-4.103
Not on this page
We did not find a general stories, FAR limit for R-H in the zoning tables we read. The code may still set one elsewhere — check the Huntington Park Municipal Code.
Other Huntington Park zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Huntington Park's R-H zone?
45 ft — Huntington Park Municipal Code § 9-4.103.
What is the minimum front setback in Huntington Park's R-H zone?
10 ft (garage doors for single-family uses must be at least 20 ft from the front property line) — Huntington Park Municipal Code § 9-4.103.
What is the minimum side setback in Huntington Park's R-H zone?
4 ft plus 1 ft for each story over 1 story — Huntington Park Municipal Code § 9-4.103.
What is the minimum rear setback in Huntington Park's R-H zone?
10 ft — Huntington Park Municipal Code § 9-4.103.
What is the minimum lot size in Huntington Park's R-H zone?
15,000 sq ft (lots created before January 1, 2019 containing no more than one dwelling unit are exempt from the minimum lot size standards) — Huntington Park Municipal Code § 9-4.103.
General information, not legal advice.
Ask about a Huntington Park property in R-H
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question