Holtville · Zoning · I-2
Holtville I-2 zoning: height, setbacks and lot size
In Holtville's I-2 zone, buildings can be up to 35 ft tall, the front setback is None required and the minimum lot size is 1 acre (Holtville code, read October 2026).
Key points
- Maximum building height: 35 ft
- Minimum front setback: None required
- Minimum side setback: None required
- Minimum rear setback: None required
- Minimum lot size: 1 acre
- Maximum lot coverage: 80%
I-2 (Heavy Industrial Zone) is a zoning district in Holtville. Every value below was read from the Holtville Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in I-2
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 35 ft § 17.40.040 · code textTable row “Maximum building height”, column “I-2 Heavy Industrial Zone”: 35 feet |
|---|---|
| Minimum front setback | None required § 17.40.040 · code textTable row “Minimum front yard requirement”, column “I-2 Heavy Industrial Zone”: None |
| Minimum side setback | None required § 17.40.040 · code textTable row “Minimum side yard requirement”, column “I-2 Heavy Industrial Zone”: None |
| Minimum rear setback | None required § 17.40.040 · code textTable row “Minimum rear yard requirement”, column “I-2 Heavy Industrial Zone”: None |
| Minimum lot size | 1 acre § 17.40.040 · code textTable row “Minimum lot area”, column “I-2 Heavy Industrial Zone”: 1 acre |
| Maximum lot coverage | 80% § 17.40.040 · code textTable row “Maximum lot coverage”, column “I-2 Heavy Industrial Zone”: 80 percent |
Not on this page
We did not find a general stories, FAR, density limit for I-2 in the zoning tables we read. The code may still set one elsewhere — check the Holtville Municipal Code.
Other Holtville zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Holtville's I-2 zone?
35 ft — Holtville Municipal Code § 17.40.040.
What is the minimum front setback in Holtville's I-2 zone?
None required — Holtville Municipal Code § 17.40.040.
What is the minimum side setback in Holtville's I-2 zone?
None required — Holtville Municipal Code § 17.40.040.
What is the minimum rear setback in Holtville's I-2 zone?
None required — Holtville Municipal Code § 17.40.040.
What is the minimum lot size in Holtville's I-2 zone?
1 acre — Holtville Municipal Code § 17.40.040.
General information, not legal advice.
Ask about a Holtville property in I-2
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question