Skip to content

Hercules · Zoning · RS-E

Hercules RS-E zoning: height, setbacks and lot size

In Hercules's RS-E zone, generally buildings can be up to 35 ft tall, the front setback is 20 ft and the minimum lot size is 1/2 acre or 1 acre, with the conditions listed below (Hercules code, read October 2026).

Key points

  • Maximum building height: 35 ft
  • Minimum front setback: 20 ft
  • Minimum side setback: 15 ft
  • Minimum rear setback: 25 ft
  • Minimum lot size: 1/2 acre or 1 acre (As the zoning map sets: 1 acre for 1 unit per acre, 0.5 acre for 2 units per acre)
  • Maximum lot coverage: 20%
  • Maximum density: 1 to 2 units per acre (As the zoning map designates; the code sets a range: at least 1, at most 2)

RS-E is a zoning district in Hercules. Every value below was read from the Hercules Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in RS-E

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
35 ft
§ 13-6.500 · code text
Table row “Building Height (ft)”, column “RS-E”: 35
Minimum front setback
20 ft
§ 13-6.500 · code text
Table row “Front (ft)”, column “RS-E”: 20
Minimum side setback
15 ft
§ 13-6.500 · code text
Table row “Side (ft)”, column “RS-E”: 15
Minimum rear setback
25 ft
§ 13-6.500 · code text
Table row “Rear (ft)”, column “RS-E”: 25
Minimum lot size
1/2 acre or 1 acre
Applies: As the zoning map sets: 1 acre for 1 unit per acre, 0.5 acre for 2 units per acre
See note 1 below the table in the code.
§ 13-6.500 · code text
Table row “Lot Size (sq ft)”, column “RS-E”: 1/2 acre (1)
Note 1: Maximum density and minimum lot size as designated on zoning map for 1 or 2 units per acre density and corresponding 1 acre or 0.5 acre minimum lot size.
Maximum lot coverage
20%
§ 13-6.500 · code text
Table row “Maximum Site Coverage”, column “RS-E”: 20%
Maximum density
1 to 2 units per acre
Applies: As the zoning map designates; the code sets a range: at least 1, at most 2
See note 1 below the table in the code.
§ 13-6.500 · code text
Table row “Range”, column “RS-E”: 1 to 2 (1)
Note 1: Maximum density and minimum lot size as designated on zoning map for 1 or 2 units per acre density and corresponding 1 acre or 0.5 acre minimum lot size.

Not on this page

We did not find a general stories, FAR limit for RS-E in the zoning tables we read. The code may still set one elsewhere — check the Hercules Municipal Code.

Other Hercules zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Hercules's RS-E zone?

35 ft — Hercules Municipal Code § 13-6.500.

What is the minimum front setback in Hercules's RS-E zone?

20 ft — Hercules Municipal Code § 13-6.500.

What is the minimum side setback in Hercules's RS-E zone?

15 ft — Hercules Municipal Code § 13-6.500.

What is the minimum rear setback in Hercules's RS-E zone?

25 ft — Hercules Municipal Code § 13-6.500.

What is the minimum lot size in Hercules's RS-E zone?

1/2 acre or 1 acre (as the zoning map sets: 1 acre for 1 unit per acre, 0.5 acre for 2 units per acre) — Hercules Municipal Code § 13-6.500.

General information, not legal advice.

Ask about a Hercules property in RS-E

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Hercules