Gustine · Zoning · PD
Gustine PD zoning: height, setbacks and lot size
In Gustine's PD zone, generally buildings can be up to 30 ft tall, the front setback is 30 ft and the minimum lot size is 7,500 to 15,000 sq ft, with the conditions listed below (Gustine code, read October 2026).
Key points
- Maximum building height: 30 ft (Table 2-3 default; the approved Planned Development Permit or specific plan sets the standards that apply)
- Minimum front setback: 30 ft (Table 2-3 default; the approved Planned Development Permit or specific plan sets the standards that apply)
- Minimum side setback: 20 ft (Table 2-3 default; the approved Planned Development Permit or specific plan sets the standards that apply)
- Minimum rear setback: 20 ft (Table 2-3 default; 1,000 sq ft of the rear third must stay uncovered; the approved permit or specific plan sets final standards)
- Minimum lot size: 7,500 to 15,000 sq ft (the code sets a range: at least 7,500, at most 15,000; the approved permit or specific plan sets final standards)
- Maximum density: 6 dwellings per gross acre (Table 2-3 default; the approved Planned Development Permit or specific plan sets the standards that apply)
PD (Planned Development) is a zoning district in Gustine. Every value below was read from the Gustine Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in PD
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 30 ft Applies: Table 2-3 default; the approved Planned Development Permit or specific plan sets the standards that apply § 4-22-040 · code textTable row “Maximum height”, column “PD Planned Development”: 30 ft |
|---|---|
| Minimum front setback | 30 ft Applies: Table 2-3 default; the approved Planned Development Permit or specific plan sets the standards that apply § 4-22-040 · code textTable row “Front”, column “PD Planned Development”: 30 ft |
| Minimum side setback | 20 ft Applies: Table 2-3 default; the approved Planned Development Permit or specific plan sets the standards that apply § 4-22-040 · code textTable row “Sides — Interior”, column “PD Planned Development”: 20 ft |
| Minimum rear setback | 20 ft Applies: Table 2-3 default; 1,000 sq ft of the rear third must stay uncovered; the approved permit or specific plan sets final standards § 4-22-040 · code textTable row “Rear”, column “PD Planned Development”: 20 ft, 1,000 sf left uncovered on rear ⅓ of lot |
| Minimum lot size | 7,500 to 15,000 sq ft Applies: the code sets a range: at least 7,500, at most 15,000; the approved permit or specific plan sets final standards § 4-22-040 · code textTable row “PD”, column “Area (net in sf)”: 7,500 to 15,000 1 |
| Maximum density | 6 dwellings per gross acre Applies: Table 2-3 default; the approved Planned Development Permit or specific plan sets the standards that apply § 4-22-040 · code textTable row “Maximum density as per General Plan”, column “PD Planned Development”: 6 dwellings per gross acre |
When a different number applies
The code sets other values for particular lots, buildings or locations in PD:
- Minimum lot size: 2,000 sq ft — parcels for ownership in a condominium, townhome or small lot project; the whole site must still meet the lot area and density rules § 4-22-040
Not on this page
We did not find a general stories, lot coverage, FAR limit for PD in the zoning tables we read. The code may still set one elsewhere — check the Gustine Municipal Code.
Other Gustine zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Gustine's PD zone?
30 ft (table 2-3 default; the approved Planned Development Permit or specific plan sets the standards that apply) — Gustine Municipal Code § 4-22-040.
What is the minimum front setback in Gustine's PD zone?
30 ft (table 2-3 default; the approved Planned Development Permit or specific plan sets the standards that apply) — Gustine Municipal Code § 4-22-040.
What is the minimum side setback in Gustine's PD zone?
20 ft (table 2-3 default; the approved Planned Development Permit or specific plan sets the standards that apply) — Gustine Municipal Code § 4-22-040.
What is the minimum rear setback in Gustine's PD zone?
20 ft (table 2-3 default; 1,000 sq ft of the rear third must stay uncovered; the approved permit or specific plan sets final standards) — Gustine Municipal Code § 4-22-040.
What is the minimum lot size in Gustine's PD zone?
7,500 to 15,000 sq ft (the code sets a range: at least 7,500, at most 15,000; the approved permit or specific plan sets final standards) — Gustine Municipal Code § 4-22-040.
General information, not legal advice.
Ask about a Gustine property in PD
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question