Glenn County · Zoning · RE-2
Glenn County RE-2 zoning: height, setbacks and lot size
In Glenn County's RE-2 zone, generally buildings can be up to 35 ft tall, the front setback is 30 ft and the minimum lot size is 1.7 acres, with the conditions listed below (Glenn County code, read October 2026).
Key points
- Maximum building height: 35 ft (residential structures)
- Minimum front setback: 30 ft
- Minimum side setback: 15 ft
- Minimum rear setback: 25 ft
- Minimum lot size: 1.7 acres
RE-2 is a zoning district in Glenn County. Every value below was read from the Glenn County Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in RE-2
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 35 ft Applies: residential structures § 15.35.070 · code textThirty-five feet for residential structures; |
|---|---|
| Minimum front setback | 30 ft § 15.35.060 · code textThe minimum front yard shall be thirty feet. |
| Minimum side setback | 15 ft § 15.35.060 · code textThe minimum side yards of interior lots shall be fifteen feet. |
| Minimum rear setback | 25 ft § 15.35.060 · code textThe minimum rear yard shall be twenty-five feet. |
| Minimum lot size | 1.7 acres § 15.35.050 · code textTable row “RE-2”, column “Minimum Parcel Size:”: 1.7 acres |
Not on this page
We did not find a general stories, lot coverage, FAR, density limit for RE-2 in the zoning tables we read. The code may still set one elsewhere — check the Glenn County Municipal Code.
Other Glenn County zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Glenn County's RE-2 zone?
35 ft (residential structures) — Glenn County Municipal Code § 15.35.070.
What is the minimum front setback in Glenn County's RE-2 zone?
30 ft — Glenn County Municipal Code § 15.35.060.
What is the minimum side setback in Glenn County's RE-2 zone?
15 ft — Glenn County Municipal Code § 15.35.060.
What is the minimum rear setback in Glenn County's RE-2 zone?
25 ft — Glenn County Municipal Code § 15.35.060.
What is the minimum lot size in Glenn County's RE-2 zone?
1.7 acres — Glenn County Municipal Code § 15.35.050.
General information, not legal advice.
Ask about a Glenn County property in RE-2
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question