Dana Point · Zoning · RMF 7
Dana Point RMF 7 zoning: height, setbacks and lot size
In Dana Point's RMF 7 zone, generally buildings can be up to 28 ft (2 stories) tall, the front setback is 20 ft and the minimum lot size is 15,000 sq ft, with the conditions listed below (Dana Point code, read October 2026).
Key points
- Maximum building height: 28 ft (Subject to the measurement and design criteria in Section 9.05.110(a).)
- Maximum number of stories: 2 stories (Subject to the measurement and design criteria in Section 9.05.110(a).)
- Minimum front setback: 20 ft
- Minimum side setback: 5 ft
- Minimum rear setback: 15 ft (Standard lot.)
- Minimum lot size: 15,000 sq ft (Applies to any proposed subdivision of land; does not apply to existing lots where no subdivision is proposed nor to proposed condominiums or other common lot subdivisions.)
- Maximum lot coverage: 50%
RMF 7 is a zoning district in Dana Point. Every value below was read from the Dana Point Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in RMF 7
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 28 ft Applies: Subject to the measurement and design criteria in Section 9.05.110(a). See note 4 below the table in the code. § 9.09.030 · code textTable row “(f) Maximum Height:”, column “RMF 7”: 28 ft/(4) 2 stories Note 4: Subject to the measurement and design criteria in Section 9.05.110(a) . |
|---|---|
| Maximum number of stories | 2 stories Applies: Subject to the measurement and design criteria in Section 9.05.110(a). See note 4 below the table in the code. § 9.09.030 · code textTable row “(f) Maximum Height:”, column “RMF 7”: 28 ft/(4) 2 stories Note 4: Subject to the measurement and design criteria in Section 9.05.110(a) . |
| Minimum front setback | 20 ft See note 5 below the table in the code. § 9.09.030 · code textTable row “From Ultimate Public Street ROW line:”, column “RMF 7”: 20 ft Note 5: For existing lots less than 50 feet wide and/or less than 100 feet deep, see Section 9.05.190 for reduced front, side and rear building setbacks. |
| Minimum side setback | 5 ft See note 5 below the table in the code. § 9.09.030 · code textTable row “Interior Side:”, column “RMF 7”: 5 ft Note 5: For existing lots less than 50 feet wide and/or less than 100 feet deep, see Section 9.05.190 for reduced front, side and rear building setbacks. |
| Minimum rear setback | 15 ft Applies: Standard lot. See note 5 below the table in the code. § 9.09.030 · code textTable row “Standard Lot:”, column “RMF 7”: 15 ft Note 5: For existing lots less than 50 feet wide and/or less than 100 feet deep, see Section 9.05.190 for reduced front, side and rear building setbacks. |
| Minimum lot size | 15,000 sq ft Applies: Applies to any proposed subdivision of land; does not apply to existing lots where no subdivision is proposed nor to proposed condominiums or other common lot subdivisions. § 9.09.030 · code textTable row “(a) Minimum Lot Size: (2)”, column “RMF 7”: 15,000 sf |
| Maximum lot coverage | 50% § 9.09.030 · code textTable row “(d) Maximum Lot Coverage:”, column “RMF 7”: 50% |
When a different number applies
The code sets other values for particular lots, buildings or locations in RMF 7:
- Minimum front setback: 15 ft — Flag lot, from connection with access extension. § 9.09.030
- Minimum rear setback: 10 ft — Adjacent to an alley; subject to the garage setback standards in Section 9.35.040(e) § 9.09.030
Not on this page
We did not find a general FAR, density limit for RMF 7 in the zoning tables we read. The code may still set one elsewhere — check the Dana Point Municipal Code.
Other Dana Point zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Dana Point's RMF 7 zone?
28 ft (subject to the measurement and design criteria in Section 9.05.110(a)) — Dana Point Municipal Code § 9.09.030.
What is the maximum number of stories in Dana Point's RMF 7 zone?
2 stories (subject to the measurement and design criteria in Section 9.05.110(a)) — Dana Point Municipal Code § 9.09.030.
What is the minimum front setback in Dana Point's RMF 7 zone?
20 ft — Dana Point Municipal Code § 9.09.030.
What is the minimum side setback in Dana Point's RMF 7 zone?
5 ft — Dana Point Municipal Code § 9.09.030.
What is the minimum rear setback in Dana Point's RMF 7 zone?
15 ft (standard lot) — Dana Point Municipal Code § 9.09.030.
General information, not legal advice.
Ask about a Dana Point property in RMF 7
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question