Skip to content

Concord · Zoning · IMX

Concord IMX zoning: height, setbacks and lot size

In Concord's IMX zone, buildings can be up to 50 ft tall, the front setback is 20 ft and the minimum lot size is 10,000 sq ft (Concord code, read October 2026).

Key points

  • Maximum building height: 50 ft
  • Minimum front setback: 20 ft
  • Minimum side setback: 10 ft
  • Minimum rear setback: 10 ft
  • Minimum lot size: 10,000 sq ft
  • Maximum floor area ratio (FAR): 1.00

IMX is a zoning district in Concord. Every value below was read from the Concord Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in IMX

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
50 ft
§ 18.50.030 · code text
Table row “Building Height (feet) maximum”, column “IMX”: 50
Minimum front setback
20 ft
§ 18.50.030 · code text
Table row “Front”, column “IMX”: 20
Minimum side setback
10 ft
§ 18.50.030 · code text
Table row “Interior Side”, column “IMX”: 10
Minimum rear setback
10 ft
§ 18.50.030 · code text
Table row “Rear”, column “IMX”: 10
Minimum lot size
10,000 sq ft
§ 18.50.030 · code text
Table row “Lot Area (square feet) minimum”, column “IMX”: 10,000
Maximum floor area ratio (FAR)
1.00
§ 18.50.030 · code text
Table row “Floor Area Ratio (FAR) maximum”, column “IMX”: 1.00

Uses in IMX

Uses the code's use tables allow in IMX, or allow with a permit. Each links to its page with the code section.

Not on this page

We did not find a general stories, lot coverage, density limit for IMX in the zoning tables we read. The code may still set one elsewhere — check the Concord Municipal Code.

Other Concord zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Concord's IMX zone?

50 ft — Concord Municipal Code § 18.50.030.

What is the minimum front setback in Concord's IMX zone?

20 ft — Concord Municipal Code § 18.50.030.

What is the minimum side setback in Concord's IMX zone?

10 ft — Concord Municipal Code § 18.50.030.

What is the minimum rear setback in Concord's IMX zone?

10 ft — Concord Municipal Code § 18.50.030.

What is the minimum lot size in Concord's IMX zone?

10,000 sq ft — Concord Municipal Code § 18.50.030.

General information, not legal advice.

Ask about a Concord property in IMX

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Concord