Clovis · Zoning · M-P
Clovis M-P zoning: height, setbacks and lot size
In Clovis's M-P zone, buildings can be up to 50 ft tall, the front setback is 25 ft and the minimum lot size is 40,000 sq. ft. (Clovis code, read October 2026).
Key points
- Maximum building height: 50 ft
- Minimum front setback: 25 ft
- Minimum side setback: 10 ft
- Minimum rear setback: 15 ft
- Minimum lot size: 40,000 sq. ft.
- Maximum lot coverage: 50%
M-P is a zoning district in Clovis. Every value below was read from the Clovis Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in M-P
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 50 ft See note 12 below the table in the code. § 9.14.030 · code textTable row “Main Structure – Maximum Height”, column “M-P”: 50 ft. (12) Note 12: A maximum height of thirty-five feet (35') when located within one hundred feet (100') of a residentially zoned parcel. |
|---|---|
| Minimum front setback | 25 ft § 9.14.030 · code textTable row “Front”, column “M-P”: 25 ft. |
| Minimum side setback | 10 ft § 9.14.030 · code textTable row “Side (Each)”, column “M-P”: 10 ft. |
| Minimum rear setback | 15 ft § 9.14.030 · code textTable row “Rear”, column “M-P”: 15 ft. |
| Minimum lot size | 40,000 sq. ft. § 9.14.030 · code textTable row “Minimum Parcel Size”, column “M-P”: 40,000 sq. ft. |
| Maximum lot coverage | 50% § 9.14.030 · code textTable row “Maximum Parcel Coverage”, column “M-P”: 50% |
Not on this page
We did not find a general stories, FAR, density limit for M-P in the zoning tables we read. The code may still set one elsewhere — check the Clovis Municipal Code.
Other Clovis zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Clovis's M-P zone?
50 ft — Clovis Municipal Code § 9.14.030.
What is the minimum front setback in Clovis's M-P zone?
25 ft — Clovis Municipal Code § 9.14.030.
What is the minimum side setback in Clovis's M-P zone?
10 ft — Clovis Municipal Code § 9.14.030.
What is the minimum rear setback in Clovis's M-P zone?
15 ft — Clovis Municipal Code § 9.14.030.
What is the minimum lot size in Clovis's M-P zone?
40,000 sq. ft. — Clovis Municipal Code § 9.14.030.
General information, not legal advice.
Ask about a Clovis property in M-P
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question