CFC · California Fire Code

What permits are required under the CFC and where are permit exceptions listed?

If your work or business operation is named in CFC Section 105 (see specifically § 105.5 for operational permits and § 105.6 for construction permits) you generally must obtain a permit unless a specific exception applies. For compressed gases, compare your total on‑site amounts to Table 105.5.9 in **§ 105.5.9**—exceed the listed threshold and you need an operational permit (vehicles using gas for propulsion are explicitly excepted).

Ask a question free See coverage

Last reviewed: July 6, 2026

What the code requires — plain English

The California Fire Code (CFC) requires two basic permit types: a construction permit to install or modify regulated systems and equipment, and an operational permit to conduct specified activities or businesses. The general permit authority and process are in § 105 of the CFC (see § 105 for scope and types).

The single most important rule: if an activity, system or quantity is named in Section § 105.5 (operational) or § 105.6 (construction) you must obtain the permit unless an explicit exception applies.

Requirements in detail

Which permit type applies

  • Operational permit — required to operate or conduct activities listed in § 105.5. Examples include hot work, hazardous-material operations, special events, fuel-dispensing, high‑piled storage, etc. § 105.5 lists dozens of specific operations.
  • Construction permit — required to install, modify or alter systems listed in § 105.6 (automatic sprinklers, fire alarms, ESS, LP‑gas systems, tank installations, etc.).

(First mention of these permit types is bolded above as required by the code.)

Compressed gases — the decision-relevant thresholds (Table)

When your activity involves compressed gases, § 105.5.9 requires an operational permit if the stored/used quantity exceeds the table thresholds. The table below reproduces the decision dimensions you will use to determine permit need.

Type of gas Permit threshold (at NTP) Code Reference
Carbon dioxide (CO2) used in enrichment systems 875 cubic feet (≈100 lb) § 105.5.9, Table 105.5.9
Carbon dioxide (liquid CO2 beverage dispensing) 875 cubic feet (≈100 lb) § 105.5.9, Table 105.5.9
Corrosive gases 200 cubic feet § 105.5.9, Table 105.5.9
Flammable gases (non‑cryogenic, non‑LPG) 200 cubic feet § 105.5.9, Table 105.5.9
Inert / simple asphyxiants 6,000 cubic feet § 105.5.9, Table 105.5.9
Oxidizing gases (including oxygen) 504 cubic feet § 105.5.9, Table 105.5.9
Toxic, highly toxic, or pyrophoric gases Any amount (permit required at any quantity) § 105.5.9, Table 105.5.9

Notes:

  • Threshold units in the table are cubic feet at NTP (1 ft3 = 0.02832 m3). Use Table 105.5.9 to compare your total on‑site amounts (sum all sources).

Where exceptions are listed

  • Section‑level exceptions are included directly after the applicable permit section. For compressed gases, the specific exception is in § 105.5.9 itself. For many construction permit items (e.g., hazardous materials, industrial ovens) § 105.6 entries include routine‑maintenance and emergency‑repair exceptions. See § 105.6 entries for those exceptions.
  • General exemptions from permit requirements (work that is not subject to the permit process) are in § 105.3. That section explains that exemption from permit does not allow work that violates other provisions (for example, repairs that affect means of egress, fire protection systems, etc. are NOT exempt).

Exceptions & special cases

  • Vehicle fuel systems: The compressed‑gas operational permit exception: vehicles equipped for and using compressed gas as vehicle fuel are exempt from § 105.5.9 permit requirements. § 105.5.9 lists that specific exception.
  • Routine maintenance and emergency repairs: Many construction‑permit items in § 105.6 (for example hazardous‑materials storage modifications, industrial ovens, automatic sprinkler work) explicitly exempt routine maintenance from a construction permit and allow emergency repairs to proceed provided the permit application is filed within a short period (often within two working days). See the exceptions in the specific § 105.6 entries.
  • Work exempt by § 105.3: ordinary repairs such as painting, carpeting, or similar finish work are typically exempt — but the exemption does not apply if the work cuts walls, changes required means of egress, or alters fire‑protection systems. See § 105.3.

If you rely on an exception, always confirm that the exact exception language in the controlling § applies to your facts — local fire code officials may add requirements or require permits notwithstanding a federal/state exception when public safety warrants it. § 105.2 and § 105.1.3 give the fire code official consolidation and supplemental authority.

Common mistakes

  • Treating “routine maintenance” as a blanket exemption. The CFC limits routine‑maintenance exemptions; work that alters fire protection or egress typically needs a permit. See § 105.1.5 and § 105.3.
  • Using per‑container quantities instead of total on‑site quantities for threshold tables. Table 105.5.9 requires comparing the aggregate on‑site amount to the threshold. See § 105.5.9 and its Table.
  • Missing the special exceptions (for example, vehicles using compressed gas as vehicle fuel are exempt under § 105.5.9). Always check the exception language in the same subsection.
  • Waiting too long after emergency repairs. Where emergency replacement or repair occurs, § 105.1.4 requires permit application submission promptly (next working day or as specified by the applicable construction‑permit subsection—some construction items allow application within two working days).
  • Assuming a single permit covers unrelated activities. Multiple permits may apply to the same location; the fire code official may consolidate them, but each regulated activity must be listed. See § 105.1.3.

Worked example

Scenario: A small commercial bakery uses CO2 for two purposes on site:

  • One insulated liquid CO2 cylinder for beverage dispensing that contains the equivalent of 120 lb CO2 (≈ 1,050 ft3 at NTP), and
  • A separate CO2 cylinder for a small CO2 blanketing system holding 80 lb CO2 (≈ 700 ft3 at NTP).

Step 1 — Add the two on‑site CO2 amounts in ft3:

  • 1,050 ft3 + 700 ft3 = 1,750 ft3 total CO2 on site.

Step 2 — Compare to the Table threshold for CO2:

  • Table 105.5.9 sets the CO2 threshold at 875 ft3 (≈100 lb) for the listed CO2 uses. § 105.5.9, Table 105.5.9.

Step 3 — Conclusion:

  • Because 1,750 ft3 > 875 ft3, the bakery must obtain an operational permit under § 105.5.9 prior to continued storage/use (unless a narrow exception applies, which in this case does not). The bakery should contact the fire code official and file an operational permit application per § 105.2 and the application requirements in § 105.4.

Related provisions (direct cites)

  • § 105 — General permit authority, application, exemptions and administration.
  • § 105.1.2 — Types of permits (operational vs construction).
  • § 105.2 — When permits are required and scope of permit requirement.
  • § 105.3 — Work exempt from permit (and limits on those exemptions).
  • § 105.4 — Permit application and documentation requirements.
  • § 105.5 — Required operational permits (see § 105.5.9 for compressed gases and Table 105.5.9).
  • § 105.5.9 — Compressed gases operational permit thresholds and exception (vehicles using compressed gas).
  • § 105.6 — Required construction permits (and the typical routine‑maintenance/repair exceptions listed for many § 105.6 items).

Code references

Grounded in the retrieved California Fire Code — click a citation to read the verbatim passage:

  • CFC § 105.6.13 High relevance — show source text

    [A] 105.6.13 Hazardous materials. A construction permit is required to install, repair damage to, abandon, remove, place temporarily out of service, or close or substantially modify a storage facility or other area regulated by Chapter 50 where the hazardous materials in use or storage exceed the amounts listed in Table 105.5.22.

    Exceptions:

    1. Routine maintenance.

    2. For repair work performed on an emergency basis, application for permit shall be made within two working days of commencement of work.

    [A] 105.6.14 High-piled combustible storage. A construction permit is required for the installation of or modification to a structure with more than 500 square feet (46 m [2] ), including aisles, of high-piled combustible storage. Maintenance performed in accordance with this code is not considered to be a modification and does not require a construction permit.

    [A] 105.6.15 Industrial ovens. A construction permit is required for installation of industrial ovens regulated by Chapter 30.

    Exceptions:

    1. Routine maintenance.

    2. For repair work performed on an emergency basis, application for permit shall be made within two working days of commencement of work.

    [A] 105.6.16 LP-gas. A construction permit is required for installation of or modification to an LP-gas system. Maintenance performed in accordance with this code is not considered to be a modification and does not require a permit.

    [A] 105.6.17 Motor vehicle repair rooms and booths. A construction permit is required to install or modify a motor vehicle repair room or booth. Maintenance performed in accordance with this code is not considered to be a modification and does not require a permit.

    [A] 105.6.18 Plant extraction systems. A construction permit is required for installation of or modification to plant extraction systems. Maintenance performed in accordance with this code is not considered to be a modification and does not require a permit.

    [A] 105.6.19 Private fire hydrants. A construction permit is required for the installation or modification of private fire hydrants. Maintenance performed in accordance with this code is not considered to be a modification and does not require a permit.

    [A] 105.6.20 Smoke control or smoke exhaust systems. Construction permits are required for installation of or alteration to smoke control or smoke exhaust systems. Maintenance performed in accordance with this code is not considered to be an alteration and does not require a permit.

    [A] 105.6.21 Solar photovoltaic power systems. A construction permit is required to install or modify solar photovoltaic power systems. Maintenance performed in accordance with this code is not considered to be a modification and does not require a permit.

    [A] 105.6.22 Special event structure. A single construction permit is required to erect and take down a temporary special event structure in accordance with Section 105.5.51.

    2025 CALIFORNIA FIRE CODE 1-25

    on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.

    DIVISION II—SCOPE AND ADMINISTRATION

    [A] 105.6.23 Spraying or dipping. A construction permit is required to install or modify a spray room, dip tank or booth. Maintenance performed in accordance with this code is not considered to be a modification and does not require a permit.

  • CFC § 105.5.59 High relevance — show source text

    An operational permit is required: 1. To engage in the mobile dispensing of gaseous hydrogen as a fuel into the fuel tanks of motor vehicles. 2. Where required by the fire code official, to utilize a site for the dispensing of gaseous hydrogen as a fuel from tank vehicles into the fuel tanks of motor vehicles.

    Exception: In cases of an emergency, a site permit is not required.

    105.5.59 Additional permits. In addition to the permits required by Section 105.6, the following permits shall be obtained from the Bureau of Fire Prevention prior to engaging in the following activities, operations, practices or functions: 1. Production facilities. To change use or occupancy, or allow the attendance of a live audience, or for wrap parties. 2. Pyrotechnics and special effects. To use pyrotechnic special effects, open flame, use of flammable or combustible liquids and gases, welding and the parking of motor vehicles in any building or location used for the purpose of motion picture, television and commercial production. 3. Live audiences. To install seating arrangements for live audiences in approved production facilities, production studios and sound stages. See Chapter 48.

    [A] 105.6 Required construction permits. The fire code official is authorized to issue construction permits for work as set forth in Sections 105.6.1 through 105.6.25.

    [A] 105.6.1 Automatic fire-extinguishing systems. A construction permit is required for installation of or modification to an automatic fire-extinguishing system, other than an automatic sprinkler system. Maintenance performed in accordance with this code is not considered to be a modification and does not require a permit.

    [A] 105.6.2 Automatic sprinkler systems. A construction permit is required for installation of or modification to an automatic sprinkler system. Maintenance performed in accordance with this code is not considered to be a modification and does not require a permit.

    [A] 105.6.3 Compressed gases. Where the compressed gases in use or storage exceed the amounts listed in Table 105.5.9, a construction permit is required to install, repair damage to, abandon, remove, place temporarily out of service, or close or substantially modify a compressed gas system.

    Exceptions:

    1. Routine maintenance.

    2. For emergency repair work performed on an emergency basis, application for permit shall be made within two working days of commencement of work.

    [A] 105.6.4 Cryogenic fluids. A construction permit is required for installation of or alteration to outdoor stationary cryogenic fluid storage systems where the system capacity exceeds the amounts listed in Table 105.5.11. Maintenance performed in accordance with this code is not considered to be an alteration and does not require a construction permit.

    1-24 2025 CALIFORNIA FIRE CODE

    on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.

    DIVISION II—SCOPE AND ADMINISTRATION

    [A] 105.6.5 Emergency responder communication coverage system. A construction permit is required for installation of or modification to in-building, two-way emergency responder communication coverage systems and related equipment. Maintenance performed in accordance with this code is not considered to be a modification and does not require a construction permit.

    [A] 105.6.6 Energy storage systems. A construction permit is required to install energy storage systems regulated by Section 1207.

  • CFC § 907.2.13.2 High relevance — show source text

    Exceptions:

    1. Where approved by the building official and the fire code official, a wired communications system in accordance with Section 907.2.13.2 shall be permitted to be installed or maintained instead of an approved communications coverage system.
    2. Where it is determined by the fire code official that the communications coverage system is not needed.
    3. In facilities where emergency responder communications coverage is required and such systems, components or equipment required could have a negative impact on the normal operations of that facility, the fire code official shall have the authority to accept an automatically activated emergency responder communications coverage system.
    4. One-story buildings not exceeding 12,000 square feet (1115 m [2] ) with no below-ground area(s).

    510.2 Emergency responder communications enhancement system in existing buildings. Existing buildings shall be provided with approved in-building emergency responder communications enhancement system for emergency responders as required in Chapter 11.

    510.3 Permits. Permits for in-building emergency responder communications enhancement systems shall be in accordance with Sections 510.3.1 and 510.3.2.

    510.3.1 Permit required. A construction permit for the installation of or modification to in-building emergency responder communications enhancement systems and related equipment is required as specified in Section 105.6.5. Maintenance performed in accordance with this code is not considered a modification and does not require a permit.

    510.3.2 Operational permit. Where required by the fire code official, an operational permit shall be issued for the operation of an in-building emergency responder communications enhancement system.

    510.4 Technical requirements. Equipment required to provide in-building emergency responder communications enhancement shall be listed in accordance with UL 2524. Systems, components and equipment required to provide the in-building emergency responder communications enhancement system shall comply with Sections 510.4.1 through 510.4.2.8.

    510.4.1 Emergency responder communications enhancement system signal strength. The building shall be considered to have an acceptable in-building emergency responder communications enhancement system where signal strength measure

    5-8 2025 CALIFORNIA FIRE CODE

    on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.

    FIRE SERVICE FEATURES

    ments in 95 percent of all areas and 99 percent of areas designated as critical areas by the fire code official on each floor of the building meet the signal strength requirements in Sections 510.4.1.1 through 510.4.1.3.

    510.4.1.1 Minimum signal strength into the building. The minimum downlink signal strength shall be sufficient to provide usable voice communications throughout the coverage area as specified by the fire code official. The downlink signal level shall be sufficient to provide not less than a Delivered Audio Quality (DAQ) of 3.0 throughout the coverage area using either narrowband analog, digital or wideband LTE signals or an equivalent bit error rate (BER), or signal-to-interference-plus-noise ratio (SINR) applicable to the technology for either analog or digital signals.

    510.4.1.2 Minimum signal strength out of the building. The minimum uplink signal strength shall be sufficient to provide usable voice communications throughout the coverage area as specified by the fire code official. The uplink signal level shall be sufficient to provide not less than a delivered audio quality (DAQ) of 3.0 using either narrowband analog, digital or wideband LTE digital signals or an equivalent bit error rate (BER), or an equivalent SINR applicable to the technology for either analog or digital signals.

  • CFC § 105.3.8 High relevance — show source text

    other information required by the fire code official. Issued permits shall bear the signature of the fire code official or other approved legal authorization.

    [A] 105.3.8 Validity of permit. The issuance or granting of a permit shall not be construed to be a permit for, or an approval of, any violation of any of the provisions of this code or of any other ordinances of the jurisdiction. Permits presuming to give authority to violate or cancel the provisions of this code or other ordinances of the jurisdiction shall not be valid. The issuance of a permit based on construction documents, operational documents and other data shall not prevent the fire code official from requiring correction of errors in the documents or other data.

    [A] 105.4 Revocation. The fire code official is authorized to revoke a permit issued under the provisions of this code where it is found by inspection or otherwise that there has been a false statement or misrepresentation as to the material facts in the application or construction documents on which the permit or approval was based including, but not limited to, any one of the following:

    1. The permit is used for a location or establishment other than that for which it was issued.
    2. The permit is used for a condition or activity other than that listed in the permit.
    3. Conditions and limitations set forth in the permit have been violated.
    4. There have been any false statements or misrepresentations as to the material fact in the application for permit or plans submitted or a condition of the permit.
    5. The permit is used by a different person or firm than the name for which it was issued.
    6. The permittee failed, refused or neglected to comply with orders or notices duly served in accordance with the provisions of this code within the time provided therein.
    7. The permit was issued in error or in violation of an ordinance, regulation or this code.

    105.5 Required operational permits. The fire code official is authorized to issue operational permits for the operations set forth in Sections 105.5.2 through 105.5.5 4 .

    105.5.1 Additive manufacturing. An operational permit is required to conduct additive manufacturing operations regulated by Section 4106.3.

    105.5.2 Aerosol products, aerosol cooking spray products and plastic aerosol 3 products. An operational permit is required to manufacture, store or handle an aggregate quantity of Level 2 or Level 3 aerosol products, aerosol cooking spray products or plastic aerosol 3 products in excess of 500 pounds (227 kg) net weight.

    105.5.3 Amusement areas. An operational permit is required to operate a special amusement area.

    105.5.4 Aviation facilities. An operational permit is required to use a Group H or Group S occupancy for aircraft servicing or repair and aircraft fuel-servicing vehicles. Additional permits required by other sections of this code include, but are not limited to, hot work, hazardous materials and flammable or combustible finishes.

    105.5.5 Carnivals and fairs. An operational permit is required to conduct a carnival or fair.

    105.5.6 Cellulose nitrate film. An operational permit is required to store, handle or use cellulose nitrate film in a Group A occupancy.

    105.5.7 Combustible dust-producing operations. An operational permit is required to operate a grain elevator, flour starch mill, feed mill, or a plant pulverizing aluminum, coal, cocoa, magnesium, spices or sugar, or other operations producing combustible dusts as defined in Chapter 2.

  • CFC § 105.5.23 High relevance — show source text

    105.5.23 HPM facilities. An operational permit is required to store, handle or use hazardous production materials.

    105.5.24 High-piled storage. An operational permit is required to use a building or portion thereof with more than 500 square feet (46 m [2] ), including aisles, of high-piled combustible storage.

    105.5.25 Hot work operations. An operational permit is required for hot work including, but not limited to:

    1. Public exhibitions and demonstrations where hot work is conducted.

    2. Use of portable hot work equipment inside a structure.

    Exception: Work that is conducted under a construction permit. 3. Fixed-site hot work equipment, such as welding booths.

    1. Hot work conducted within a wildfire risk area.

    2. Application of roof coverings with the use of an open-flame device.

    3. Where approved, the fire code official shall issue a permit to carry out a hot work program. This program allows approved personnel to regulate their facility’s hot work operations. The approved personnel shall be trained in the fire safety aspects denoted in this chapter and shall be responsible for issuing permits requiring compliance with the

    1-22 2025 CALIFORNIA FIRE CODE

    on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.

    DIVISION II—SCOPE AND ADMINISTRATION

    requirements found in Chapter 35. These permits shall be issued only to their employees or hot work operations under their supervision.

    105.5.26 Indoor plant cultivation. An operational permit is required for plant cultivation where a carbon dioxide (CO 2 ) enriched environment is created.

    105.5.27 Industrial ovens. An operational permit is required for operation of industrial ovens regulated by Chapter 30.

    105.5.28 Liquid- or gas-fueled vehicles or equipment in assembly buildings. An operational permit is required to display, operate or demonstrate liquid- or gas-fueled vehicles or equipment in assembly buildings.

    105.5.29 Lithium batteries. An operational permit is required for an accumulation of more than 15 cubic feet (0.42 m) of lithiumion and lithium metal batteries, where required by Section 320.2.

    105.5.30 LP-gas. An operational permit is required for:

    1. Storage and use of LP-gas.

    Exception: A permit is not required for individual containers with a 500-gallon (1893 L) water capacity or less or multiple container systems having an aggregate quantity not exceeding 500 gallons (1893 L), serving occupancies in Group R-3. 2. Operation of cargo tankers that transport LP-gas.

    105.5.31 Lumber yards and woodworking plants. An operational permit is required for the storage or processing of lumber exceeding 100,000 board feet (8,333 ft [3] ) (236 m [3] ).

    105.5.32 Magnesium. An operational permit is required to melt, cast, heat treat or grind more than 10 pounds (4.54 kg) of magnesium.

    105.5.33 Miscellaneous combustible storage. An operational permit is required to store in any building or on any premises in excess of 2,500 cubic feet (71 m [3] ) gross volume of combustible empty packing cases, boxes, barrels or similar containers, combustible pallets, rubber tires, rubber, cork or similar combustible material.

    105.5.34 Mobile food preparation vehicles. An operational permit is required for mobile food preparation vehicles equipped with appliances that produce smoke or grease-laden vapors.

  • CFC § 3.1. High relevance — show source text

    Exceptions:

    1. Tents used exclusively for recreational camping purposes.
    2. Tents, curtains and extensions attached thereto, when used for funeral services.
    3. Tents open on all sides, which comply with all of the following: 3.1. Individual tents having a maximum size of 700 square feet (65 m [2] ). 3.2. The aggregate area of multiple tents placed side by side without a fire break clearance of not less than 12 feet (3658 mm) shall not exceed 700 square feet (65 m [2] ) total. 3.3. A minimum clearance of 12 feet (3658 mm) to structures and other tents shall be provided.

    105.5.52 Tire-rebuilding plants. An operational permit is required for the operation and maintenance of a tire-rebuilding plant.

    105.5.53 Waste handling. An operational permit is required for the operation of wrecking yards, junk yards and waste materialhandling facilities.

    105.5.54 Wood products. An operational permit is required to store chips, hogged material, lumber or plywood in excess of 200 cubic feet (6 m [3] ).

    105.5.55 Temporary heating or cooking in tents or membrane structures. An operational permit is required to operate temporary heating or cooking equipment within tents or membrane structures.

    105.5.56 Temporary heating or cooking in wildfire risk areas. Where required by local regulations, an operational permit is required to operate temporary heating or cooking equipment in wildfire risk areas

    105.5.57 Temporary heating for construction sites. An operational permit is required to operate temporary heating equipment in structures during the course of construction, alteration or demolition.

    105.5.58 Mobile fueling of hydrogen-fueled vehicles.

    An operational permit is required: 1. To engage in the mobile dispensing of gaseous hydrogen as a fuel into the fuel tanks of motor vehicles. 2. Where required by the fire code official, to utilize a site for the dispensing of gaseous hydrogen as a fuel from tank vehicles into the fuel tanks of motor vehicles.

    Exception: In cases of an emergency, a site permit is not required.

    105.5.59 Additional permits. In addition to the permits required by Section 105.6, the following permits shall be obtained from the Bureau of Fire Prevention prior to engaging in the following activities, operations, practices or functions: 1. Production facilities. To change use or occupancy, or allow the attendance of a live audience, or for wrap parties. 2. Pyrotechnics and special effects. To use pyrotechnic special effects, open flame, use of flammable or combustible liquids and gases, welding and the parking of motor vehicles in any building or location used for the purpose of motion picture, television and commercial production. 3. Live audiences. To install seating arrangements for live audiences in approved production facilities, production studios and sound stages. See Chapter 48.

    [A] 105.6 Required construction permits. The fire code official is authorized to issue construction permits for work as set forth in Sections 105.6.1 through 105.6.25.

    [A] 105.6.1 Automatic fire-extinguishing systems. A construction permit is required for installation of or modification to an automatic fire-extinguishing system, other than an automatic sprinkler system. Maintenance performed in accordance with this code is not considered to be a modification and does not require a permit.

  • CFC § 104.9.1 High relevance — show source text

    [A] 104.9.1 Materials and equipment reuse. Materials, equipment and devices shall not be reused unless such elements are in good working order and approved.

    [A] 104.10 Other agencies. When requested to do so by the code official, other officials of this jurisdiction shall assist and cooperate with the code official in the discharge of the duties required by this code.

    SECTION 105—PERMITS

    [A] 105.1 General. Where not otherwise provided in the requirements of the California Building Code or California Fire Code, permits are required in accordance with Sections 105.2 through 105.10.

    [A] 105.2 Permits required. Unless otherwise exempted, buildings or structures regulated by this code shall not be erected, constructed, altered, repaired, moved, removed, converted, demolished or changed in use or occupancy unless a separate permit for each building or structure has first been obtained from the code official.

    For buildings or structures erected for temporary uses, see Section A108.3.

    Where required by the code official, a permit shall be obtained for the following activities, operations, practices or functions within a wildland-urban interface area:

    1. Automobile wrecking yard.

    2. Candles and open flames in assembly areas.

    3. Explosives or blasting agents.

    4. Fireworks.

    5. Flammable or combustible liquids.

    6. Hazardous materials.

    7. Liquefied petroleum gases.

    8. Lumberyards.

    9. Motor vehicle fuel-dispensing stations.

    10. Open burning.

    11. Pyrotechnical special effects material.

    12. Tents, canopies and temporary membrane structures.

    13. Tire storage.

    14. Welding and cutting operations.

    [A] 105.3 Work exempt from permit. Exemption from the permit requirements of this code or in other Parts of Title 24 shall not be deemed to grant authorization for any work to be done in any manner in violation of the provisions of this code or any other laws or ordinances of this jurisdiction.

    The code official is authorized to stipulate conditions for permits. Permits shall not be issued where public safety would be at risk, as determined by the code official.

    [A] 105.4 Permit application. To obtain a permit, the applicant shall first file an application therefor in writing on a form furnished by the code enforcement agency for that purpose. Every such application shall:

    1. Identify and describe the work, activity, operation, practice or function to be covered by the permit for which application is made.

    2. Describe the land on which the proposed work, activity, operation, practice or function is to be done by legal description, street address or similar description that will readily identify and definitely locate the proposed building, work, activity, operation, practice or function.

    3. Indicate the use or occupancy for which the proposed work, activity, operation, practice or function is intended.

    4. Be accompanied by plans, diagrams, computation and specifications and other data as required in Section 106 of this code.

    5. State the valuation of any new building or structure or any addition, remodeling or alteration to an existing building.

    6. Be signed by the applicant or the applicant’s authorized agent.

    7. Give such other data and information as required by the code official.

    [A] 105.4.1 Preliminary inspection. Before a permit is issued, the code official is authorized to inspect and approve the systems, equipment, buildings, devices, premises and spaces or areas to be used.

  • CFC § 105.1.2 High relevance — show source text

    105.1.2 Types of permits. There shall be two types of permits as follows:

    1. Operational permit. An operational permit allows the applicant to conduct an operation or a business for which a permit is required by Section 105.5 for either: 1.1. A prescribed period.

    1.2. Until renewed or revoked.

    1. Construction permit. A construction permit allows the applicant to install or modify systems and equipment for which a permit is required by Section 105.6.

    105.1.3 Multiple permits for the same location. Where more than one permit is required for the same location, the fire code offi- cial is authorized to consolidate such permits into a single permit provided that each provision is listed in the permit.

    [A] 105.1.4 Emergency repairs. Where equipment replacement and repairs must be performed in an emergency situation, the permit application shall be submitted within the next working business day to the fire code official.

    [A] 105.1.5 Repairs. Application or notice to the fire code official is not required for ordinary repairs to structures, equipment or systems. Such repairs shall not include the cutting away of any wall, partition or portion thereof, the removal or change of any required means of egress, or rearrangement of parts of a structure affecting the egress requirements; nor shall any repairs include addition to, alteration of, replacement or relocation of any standpipe, fire protection water supply, automatic sprinkler system, fire alarm system or other work affecting fire protection or life safety.

    [A] 105.1.6 Annual permit. Instead of an individual construction permit for each alteration to an already approved system or equipment installation, the fire code official is authorized to issue an annual permit on application therefor to any person, firm or corporation regularly employing one or more qualified tradespersons in the building, structure or on the premises owned or operated by the applicant for the permit.

    [A] 105.1.6.1 Annual permit records. The person to whom an annual permit is issued shall keep a detailed record of alterations made under such annual permit. The fire code official shall have access to such records at all times or such records shall be filed with the fire code official as designated.

    2025 CALIFORNIA FIRE CODE 1-17

    on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.

    DIVISION II—SCOPE AND ADMINISTRATION

    [A] 105.2 Application. Application for a permit required by this code shall be made to the fire code official in such form and detail as prescribed by the fire code official. Applications for permits shall be accompanied by such plans as prescribed by the fire code official.

    [A] 105.2.1 Refusal to issue permit. If the application for a permit describes a use that does not conform to the requirements of this code and other pertinent laws and ordinances, the fire code official shall not issue a permit, but shall return the application to the applicant with the refusal to issue such permit. Such refusal shall, where requested, be in writing and shall contain the reasons for refusal.

    [A] 105.2.2 Inspection authorized. Before a new operational permit is approved, the fire code official is authorized to inspect the receptacles, vehicles, buildings, devices, premises, storage spaces or areas to be used to determine compliance with this code or any operational constraints required.

  • CFC § 104.9.1 High relevance — show source text

    ADMINISTRATION

    [A] 104.9.1 Materials and equipment reuse. Materials, equipment and devices shall not be reused unless such elements are in good working condition and approved.

    SECTION 105—PERMITS

    [A] 105.1 Required. Any owner or owner’s authorized agent who intends to repair, add to, alter, relocate, demolish or change the occupancy of a building or to repair, install, add, alter, remove, convert or replace any electrical, gas, mechanical or plumbing system, the installation of which is regulated by this code, or to cause any such work to be performed, shall first make application to the code official and obtain the required permit.

    [A] 105.1.1 Annual permit. Instead of an individual permit for each alteration to an already approved electrical, gas, mechanical, or plumbing installation, the code official is authorized to issue an annual permit on application therefor to any person, firm or corporation regularly employing one or more qualified trade persons in the building, structure, or on the premises owned or operated by the applicant for the permit.

    [A] 105.1.2 Annual permit records. The person to whom an annual permit is issued shall keep a detailed record of alterations made under such annual permit. The code official shall have access to such records at all times, or such records shall be filed with the code official as designated.

    [A] 105.2 Work exempt from permit. Exemptions from permit requirements of this code shall not be deemed to grant authorization for any work to be done in any manner in violation of the provisions of this code or any other laws or ordinances of this jurisdiction. Permits shall not be required for the following:

    Building:

    1. Sidewalks and driveways not more than 30 inches (762 mm) above grade and not over any basement or story below and that are not part of an accessible route.
    2. Painting, papering, tiling, carpeting, cabinets, counter tops and similar finish work.
    3. Temporary motion picture, television, and theater stage sets and scenery.
    4. Shade cloth structures constructed for nursery or agricultural purposes, and not including service systems.
    5. Window awnings supported by an exterior wall of Group R-3 or Group U occupancies.
    6. Nonfixed and movable cases, counters and partitions not over 5 feet 9 inches (1753 mm) in height.

    Electrical:

    1. Repairs and maintenance: Minor repair work, including the replacement of lamps or the connection of approved portable electrical equipment to approved permanently installed receptacles.

    2. Radio and television transmitting stations: The provisions of this code shall not apply to electrical equipment used for radio and television transmissions, but do apply to equipment and wiring for power supply, the installations of towers and antennas.

    3. Temporary testing systems: A permit shall not be required for the installation of any temporary system required for the testing or servicing of electrical equipment or apparatus.

    Gas:

    1. Portable heating appliance.
    2. Replacement of any minor part that does not alter approval of equipment or make such equipment unsafe.

    Mechanical:

    1. Portable heating appliance.
    2. Portable ventilation equipment.
    3. Portable cooling unit.
    4. Steam, hot or chilled water piping within any heating or cooling equipment regulated by this code.
    5. Replacement of any part that does not alter its approval or make it unsafe.
    6. Portable evaporative cooler.
    7. Self-contained refrigeration system containing 10 pounds (4.54 kg) or less of refrigerant and actuated by motors of 1 horsepower (746 W) or less.
  • CFC § 1.8.4 High relevance — show source text

    SECTION 1.8.4—PERMITS, FEES, APPLICATIONS AND INSPECTIONS

    1.8.4.1 Permits. A written construction permit shall be obtained from the enforcing agency prior to the erection, construction, reconstruction, installation, moving or alteration of any building or structure.

    Exceptions:

    1. Work exempt from permits as specified in Chapter 1, Division II, Scope and Administration, Section 105.2. 2. Changes, alterations or repairs of a minor nature not affecting structural features, egress, sanitation, safety or accessibility as determined by the enforcing agency. 3. Retroactive permits issued in accordance with Health and Safety Code Section 17958.12.

    Exemptions from permit requirements shall not be deemed to grant authorization for any work to be done in any manner in violation of other provisions of law or this code.

    1.8.4.2 Fees. Subject to other provisions of law, the governing body of any city, county, or city and county may prescribe fees to defray the cost of enforcement of rules and regulations promulgated by the Department of Housing and Community Development. The amount of the fees shall not exceed the amount reasonably necessary to administer or process permits, certificates, forms or other documents, or to defray the costs of enforcement. For additional information, see the State Housing Law, Health and Safety Code, Division 13, Part 1.5, Section 17951 and California Code of Regulations, Title 25, Division 1, Chapter 1, Subchapter 1, Article 3, commencing with Section 6.

    1.8.4.3 Plan review and time limitations. Subject to other provisions of law, provisions related to plan checking, prohibition of excessive delays and contracting with or employment of private parties to perform plan checking are set forth in the State Housing Law, Health and Safety Code Section 17960.1, and for employee housing, in Health and Safety Code Section 17021.

    1.8.4.3.1 Retention of plans. The building department of every city, county, or city and county shall maintain an official copy, microfilm, electronic or other type of photographic copy of the plans of every building, during the life of the building, for which the department issued a building permit.

    Exceptions:

    1. Single or multiple dwellings not more than two stories and basement in height. 2. Garages and other structures appurtenant to buildings listed in Exception 1. 3. Farm or ranch buildings appurtenant to buildings listed in Exception 1. 4. Any one-story building where the span between bearing walls does not exceed 25 feet (7620 mm), except a steel frame or concrete building.

    All plans for common interest developments as defined in Section 4100 of the California Civil Code shall be retained. For additional information regarding plan retention and reproduction of plans by an enforcing agency, see Health and Safety Code Sections 19850 through 19852.

  • CFC § 3.785 High relevance — show source text

    5.8| |Liquids|10 gallons| |Solids|100 pounds| |Unstable (reactive) materials|| |Liquids
    Class 4
    Class 3
    Class 2
    Class 1|Any Amount
    Any Amount
    5 gallons
    10 gallons| |Solids
    Class 4
    Class 3
    Class 2
    Class 1|Any Amount
    Any Amount
    50 pounds
    100 pounds| |Water-reactive materials|| |Liquids
    Class 3
    Class 2
    Class 1|Any Amount
    5 gallons
    55 gallons| |Solids
    Class 3
    Class 2
    Class 1|Any Amount
    50 pounds
    500 pounds| |For SI: 1 gallon = 3.785 L, 1 pound = 0.454 kg.
    a. 22 gallons where Table 5003.1.1(1) Note k applies and hazard identification signs in accordance with Section 5003.5 are provided for quantities of 22
    gallons or less.
    b. 220 pounds where Table 5003.1.1(1) Note k applies and hazard identification signs in accordance with Section 5003.5 are provided for quantities of 220
    pounds or less.|For SI: 1 gallon = 3.785 L, 1 pound = 0.454 kg.
    a. 22 gallons where Table 5003.1.1(1) Note k applies and hazard identification signs in accordance with Section 5003.5 are provided for quantities of 22
    gallons or less.
    b. 220 pounds where Table 5003.1.1(1) Note k applies and hazard identification signs in accordance with Section 5003.5 are provided for quantities of 220
    pounds or less.|

    105.5.23 HPM facilities. An operational permit is required to store, handle or use hazardous production materials.

    105.5.24 High-piled storage. An operational permit is required to use a building or portion thereof with more than 500 square feet (46 m [2] ), including aisles, of high-piled combustible storage.

    105.5.25 Hot work operations. An operational permit is required for hot work including, but not limited to:

    1. Public exhibitions and demonstrations where hot work is conducted.

    2. Use of portable hot work equipment inside a structure.

    Exception: Work that is conducted under a construction permit. 3. Fixed-site hot work equipment, such as welding booths.

    1. Hot work conducted within a wildfire risk area.

    2. Application of roof coverings with the use of an open-flame device.

    3. Where approved, the fire code official shall issue a permit to carry out a hot work program. This program allows approved personnel to regulate their facility’s hot work operations. The approved personnel shall be trained in the fire safety aspects denoted in this chapter and shall be responsible for issuing permits requiring compliance with the

    1-22 2025 CALIFORNIA FIRE CODE

    on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.

    DIVISION II—SCOPE AND ADMINISTRATION

    requirements found in Chapter 35. These permits shall be issued only to their employees or hot work operations under their supervision.

    105.5.26 Indoor plant cultivation. An operational permit is required for plant cultivation where a carbon dioxide (CO 2 ) enriched environment is created.

  • CFC § 104.7.5 High relevance — show source text

    [A] 104.7.5 Fees. The code official shall keep a record of fees collected and refunded in accordance with Section 108.

    [A] 104.8 Liability. The code official, member of the board of appeals or employee charged with the enforcement of this code, while acting for the jurisdiction, in good faith and without malice in the discharge of the duties required by this code or other pertinent law or ordinance, shall not thereby be rendered personally liable, either civilly or criminally, and is hereby relieved from all personal liability for any damage accruing to persons or property as a result of an act or by reason of any act or omission in the discharge of official duties.

    [A] 104.8.1 Legal defense. Any suit or criminal complaint instituted against any officer or employee because of an act performed by that officer or employee in the lawful discharge of duties and under the provisions of this code or other laws or ordinances

    1-18 2025 CALIFORNIA WILDLAND-URBAN INTERFACE CODE

    on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.

    ADMINISTRATION

    implemented through the enforcement of this code shall be defended by legal representatives of the jurisdiction until final termination of the proceedings. The code official or any subordinate shall not be liable for costs in an action, suit or proceeding that is instituted in pursuance of the provisions of this code.

    [A] 104.9 Approved materials and equipment. Materials, equipment and devices approved by the code official shall be constructed and installed in accordance with such approval.

    [A] 104.9.1 Materials and equipment reuse. Materials, equipment and devices shall not be reused unless such elements are in good working order and approved.

    [A] 104.10 Other agencies. When requested to do so by the code official, other officials of this jurisdiction shall assist and cooperate with the code official in the discharge of the duties required by this code.

    SECTION 105—PERMITS

    [A] 105.1 General. Where not otherwise provided in the requirements of the California Building Code or California Fire Code, permits are required in accordance with Sections 105.2 through 105.10.

    [A] 105.2 Permits required. Unless otherwise exempted, buildings or structures regulated by this code shall not be erected, constructed, altered, repaired, moved, removed, converted, demolished or changed in use or occupancy unless a separate permit for each building or structure has first been obtained from the code official.

    For buildings or structures erected for temporary uses, see Section A108.3.

    Where required by the code official, a permit shall be obtained for the following activities, operations, practices or functions within a wildland-urban interface area:

    1. Automobile wrecking yard.

    2. Candles and open flames in assembly areas.

    3. Explosives or blasting agents.

    4. Fireworks.

    5. Flammable or combustible liquids.

    6. Hazardous materials.

    7. Liquefied petroleum gases.

    8. Lumberyards.

    9. Motor vehicle fuel-dispensing stations.

    10. Open burning.

    11. Pyrotechnical special effects material.

    12. Tents, canopies and temporary membrane structures.

    13. Tire storage.

    14. Welding and cutting operations.

  • CFC § 105.5 High relevance — show source text
    1. The permit was issued in error or in violation of an ordinance, regulation or this code.

    105.5 Required operational permits. The fire code official is authorized to issue operational permits for the operations set forth in Sections 105.5.2 through 105.5.5 4 .

    105.5.1 Additive manufacturing. An operational permit is required to conduct additive manufacturing operations regulated by Section 4106.3.

    105.5.2 Aerosol products, aerosol cooking spray products and plastic aerosol 3 products. An operational permit is required to manufacture, store or handle an aggregate quantity of Level 2 or Level 3 aerosol products, aerosol cooking spray products or plastic aerosol 3 products in excess of 500 pounds (227 kg) net weight.

    105.5.3 Amusement areas. An operational permit is required to operate a special amusement area.

    105.5.4 Aviation facilities. An operational permit is required to use a Group H or Group S occupancy for aircraft servicing or repair and aircraft fuel-servicing vehicles. Additional permits required by other sections of this code include, but are not limited to, hot work, hazardous materials and flammable or combustible finishes.

    105.5.5 Carnivals and fairs. An operational permit is required to conduct a carnival or fair.

    105.5.6 Cellulose nitrate film. An operational permit is required to store, handle or use cellulose nitrate film in a Group A occupancy.

    105.5.7 Combustible dust-producing operations. An operational permit is required to operate a grain elevator, flour starch mill, feed mill, or a plant pulverizing aluminum, coal, cocoa, magnesium, spices or sugar, or other operations producing combustible dusts as defined in Chapter 2.

    105.5.8 Combustible fibers. An operational permit is required for the storage and handling of combustible fibers in quantities greater than 100 cubic feet (2.8 m [3] ).

    Exception: A permit is not required for agricultural storage.

    105.5.9 Compressed gases. An operational permit is required for the storage, use or handling at normal temperature and pressure (NTP) of compressed gases in excess of the amounts listed in Table 105.5.9.

    Exception: Vehicles equipped for and using compressed gas as a fuel for propelling the vehicle.

    TABLE 105.5.9—PERMIT AMOUNTS FOR COMPRESSED GASES Col2
    TYPE OF GAS AMOUNT
    (cubic feet at NTP)
    Carbon dioxide used in carbon dioxide enrichment systems 875 (100 lb)
    Carbon dioxide used in insulated liquid carbon dioxide beverage dispensing applications 875 (100 lb)
    Corrosive 200
    Flammable (except cryogenic fluids and liquefied petroleum gases) 200
    Highly toxic Any Amount
    Inert and simple asphyxiant 6,000
    Oxidizing (including oxygen) 504
    Pyrophoric Any Amount
    Toxic Any Amount
    For SI: 1 cubic foot = 0.02832 m3. For SI: 1 cubic foot = 0.02832 m3.

    2025 CALIFORNIA FIRE CODE 1-19

    on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.

    DIVISION II—SCOPE AND ADMINISTRATION

  • CFC § 105.5.11 High relevance — show source text
    1. The display of liquid- or gas-fired equipment in the mall.
    2. The use of open-flame or flame-producing equipment in the mall.

    105.5.11 Cryogenic fluids. An operational permit is required to produce, store, transport on site, use, handle or dispense cryogenic fluids in excess of the amounts listed in Table 105.5.11.

    Exception: Permits are not required for vehicles equipped for and using cryogenic fluids as a fuel for propelling the vehicle or for refrigerating the lading.

    TABLE 105.5.11—PERMIT AMOUNTS FOR CRYOGENIC FLUIDS Col2 Col3
    TYPE OF
    CRYOGENIC FLUID    		 INSIDE BUILDING
    (gallons)    		 OUTSIDE BUILDING
    (gallons)
    Flammable More than 1 60
    Inert 60 500
    Oxidizing (includes oxygen) 10 50
    Physical or health hazard not indicated above Any Amount Any Amount
    For SI: 1 gallon = 3.785 L. For SI: 1 gallon = 3.785 L. For SI: 1 gallon = 3.785 L.

    105.5.12 Cutting and welding. An operational permit is required to conduct cutting or welding operations within the jurisdiction.

    105.5.13 Dry cleaning. An operational permit is required to engage in the business of dry cleaning or to change to a more hazardous cleaning solvent used in existing dry cleaning equipment.

    105.5.14 Energy storage systems. An operational permit is required for stationary and mobile energy storage systems regulated by Section 1207. Operational permits shall not be required for ESS located at detached one- and two-family dwellings and town- houses, other than Group R-4.

    105.5.15 Exhibits and trade shows. An operational permit is required to operate exhibits and trade shows.

    105.5.16 Explosives. An operational permit is required for the manufacture, storage, handling, sale or use of any quantity of explosives, explosive materials, fireworks or pyrotechnic special effects within the scope of Chapter 56. See Health and Safety Code Division 11, Part 1, Sections 12000, et seq. for additional requirements.

    Exception: Storage in Group R-3 occupancies of smokeless propellant, black powder and small arms primers for personal use, not for resale and in accordance with Section 5606.

    105.5.17 Fire hydrants and valves. An operational permit is required to use or operate fire hydrants or valves intended for fire suppression purposes that are installed on water systems and provided with ready access from a fire apparatus access road that is open to or generally used by the public.

    Exception: A permit is not required for authorized employees of the water company that supplies the system or the fire department to use or operate fire hydrants or valves.

    105.5.18 Flammable and combustible liquids. An operational permit is required:

    1. To use or operate a pipeline for the transportation within facilities of flammable or combustible liquids. This requirement shall not apply to the off-site transportation in pipelines regulated by the Department of Transportation (DOTn) nor does it apply to piping systems.
  • CFC § 104.11.1 High relevance — show source text

    In the exercise of such power, the fire chief is authorized to prohibit any person, vehicle, vessel or thing from approaching the scene, and is authorized to remove, or cause to be removed or kept away from the scene, any vehicle, vessel or thing that could impede or interfere with the operations of the fire department and, in the judgment of the fire chief, any person not actually and usefully employed in the extinguishing of such fire or in the preservation of property in the vicinity thereof.

    104.11.1 Barricades. The fire chief or officer of the fire department in charge at the scene of an emergency is authorized to place ropes, guards, barricades or other obstructions across any street, alley, place or private property in the vicinity of such operation so as to prevent accidents or interference with the lawful efforts of the fire department to manage and control the situation and to handle fire apparatus.

    104.11.2 Obstructing operations. Persons shall not obstruct the operations of the fire department in connection with extinguishment or control of any fire, or actions relative to other emergencies, or disobey any lawful command of the fire chief or officer of the fire department in charge of the emergency, or any part thereof, or any lawful order of a police officer assisting the fire department.

    104.11.3 Systems and devices. Persons shall not render a system or device inoperative during an emergency unless by direction of the fire chief or fire department official in charge of the incident.

    SECTION 105—PERMITS

    [A] 105.1 General. Permits shall be in accordance with Sections 105.1.1 through 105.6.25.

    [A] 105.1.1 Permits required. A property owner or owner’s authorized agent who intends to conduct an operation or business, or install or modify systems and equipment that are regulated by this code, or to cause any such work to be performed, shall first make application to the fire code official and obtain the required permit.

    105.1.2 Types of permits. There shall be two types of permits as follows:

    1. Operational permit. An operational permit allows the applicant to conduct an operation or a business for which a permit is required by Section 105.5 for either: 1.1. A prescribed period.

    1.2. Until renewed or revoked.

    1. Construction permit. A construction permit allows the applicant to install or modify systems and equipment for which a permit is required by Section 105.6.

    105.1.3 Multiple permits for the same location. Where more than one permit is required for the same location, the fire code offi- cial is authorized to consolidate such permits into a single permit provided that each provision is listed in the permit.

    [A] 105.1.4 Emergency repairs. Where equipment replacement and repairs must be performed in an emergency situation, the permit application shall be submitted within the next working business day to the fire code official.

    [A] 105.1.5 Repairs. Application or notice to the fire code official is not required for ordinary repairs to structures, equipment or systems. Such repairs shall not include the cutting away of any wall, partition or portion thereof, the removal or change of any required means of egress, or rearrangement of parts of a structure affecting the egress requirements; nor shall any repairs include addition to, alteration of, replacement or relocation of any standpipe, fire protection water supply, automatic sprinkler system, fire alarm system or other work affecting fire protection or life safety.

  • CFC § 105.5.45 High relevance — show source text

    105.5.45 Pyroxylin plastics. An operational permit is required for storage or handling of more than 25 pounds (11 kg) of cellulose nitrate (pyroxylin) plastics, and for the assembly or manufacture of articles involving pyroxylin plastics.

    105.5.46 Refrigeration equipment. An operational permit is required to operate a mechanical refrigeration unit or system regulated by Chapter 6.

    105.5.47 Repair garages and motor fuel-dispensing facilities. An operational permit is required for operation of repair garages.

    105.5.48 Rooftop heliports. An operational permit is required for the operation of a rooftop heliport.

    105.5.49 Spraying or dipping. An operational permit is required to conduct a spraying or dipping operation utilizing flammable or combustible liquids, or the application of combustible powders regulated by Chapter 24.

    105.5.50 Storage of scrap tires and tire byproducts. An operational permit is required to establish, conduct or maintain storage of scrap tires and tire byproducts that exceeds 2,500 cubic feet (71 m [3] ) of total volume of scrap tires, and for indoor storage of tires and tire byproducts.

    2025 CALIFORNIA FIRE CODE 1-23

    on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.

    DIVISION II—SCOPE AND ADMINISTRATION

    105.5.51 Temporary membrane structures, special event structures and tents. An operational permit is required to operate an air-supported temporary membrane structure, a temporary special event structure or a tent having an area in excess of 400 square feet (37 m [2] ).

    Exceptions:

    1. Tents used exclusively for recreational camping purposes.
    2. Tents, curtains and extensions attached thereto, when used for funeral services.
    3. Tents open on all sides, which comply with all of the following: 3.1. Individual tents having a maximum size of 700 square feet (65 m [2] ). 3.2. The aggregate area of multiple tents placed side by side without a fire break clearance of not less than 12 feet (3658 mm) shall not exceed 700 square feet (65 m [2] ) total. 3.3. A minimum clearance of 12 feet (3658 mm) to structures and other tents shall be provided.

    105.5.52 Tire-rebuilding plants. An operational permit is required for the operation and maintenance of a tire-rebuilding plant.

    105.5.53 Waste handling. An operational permit is required for the operation of wrecking yards, junk yards and waste materialhandling facilities.

    105.5.54 Wood products. An operational permit is required to store chips, hogged material, lumber or plywood in excess of 200 cubic feet (6 m [3] ).

    105.5.55 Temporary heating or cooking in tents or membrane structures. An operational permit is required to operate temporary heating or cooking equipment within tents or membrane structures.

    105.5.56 Temporary heating or cooking in wildfire risk areas. Where required by local regulations, an operational permit is required to operate temporary heating or cooking equipment in wildfire risk areas

    105.5.57 Temporary heating for construction sites. An operational permit is required to operate temporary heating equipment in structures during the course of construction, alteration or demolition.

    105.5.58 Mobile fueling of hydrogen-fueled vehicles.

Frequently asked questions

Who issues CFC permits and where do I apply?

The local fire code official issues CFC permits; application procedures and required documents are set out in § 105.2 and § 105.4. Contact your local fire prevention bureau to obtain the application form and plan submittal requirements.

If I perform emergency repairs, do I still need a permit?

Emergency repairs are permitted to proceed in many cases, but the code requires prompt notice or application afterward — see § 105.1.4 and the specific construction‑permit entry (many allow application within two working days).

How do I know whether a gas quantity triggers a permit?

Compare your total on‑site amount (sum all containers and sources) to the Table in § 105.5.9 (Table 105.5.9). If the aggregate exceeds the table threshold you need an operational permit, unless a listed exception applies (for example, vehicles using gas for fuel).

Are there permits for energy storage systems (ESS)?

Yes — construction permits for ESS installations are required under § 105.6.6 and operational permits for certain deployments are listed under § 105.5.14.

Can the fire code official combine multiple permits into one?

Yes — § 105.1.3 authorizes the fire code official to consolidate multiple permits for the same location into a single permit so long as each provision is included.

More in California Fire Code

Ask about the CFC

Get cited, plain-English answers on the California Fire Code for your project — any code section, any scenario.

Start Free Trial

Related in the CFC

Inspections, maintenance and service utilities requirements

Violations, stop-work orders and means of appeal

Construction documents and submittal requirements for fire-related permits

Permits, inspections & enforcement

California Fire Code