Skip to content

Butte County · Zoning · VLDR

Butte County VLDR zoning: height, setbacks and lot size

In Butte County's VLDR zone, generally buildings can be up to 35 ft tall, the front setback is 20 ft and the minimum lot size is 1 acre, with the conditions listed below (Butte County code, read October 2026).

Key points

  • Maximum building height: 35 ft
  • Minimum front setback: 20 ft
  • Minimum lot size: 1 acre (Applies only to the creation of new parcels through the subdivision process)
  • Maximum density: 1 unit per parcel (Only one primary dwelling unit and one accessory dwelling unit is permitted per parcel, regardless of parcel size)

VLDR is a zoning district in Butte County. Every value below was read from the Butte County Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in VLDR

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
35 ft
§ 24-20 · code text
Table row “Primary Structure Height (max.)”, column “VLDR”: 35 ft.
Minimum front setback
20 ft
§ 24-20 · code text
Table row “Front”, column “FR/FCR”: 20 ft.
Minimum lot size
1 acre
Applies: Applies only to the creation of new parcels through the subdivision process
§ 24-20 · code text
Table row “VLDR”, column “Parcel Area (min.) [4] [5]”: 1 acre
Maximum density
1 unit per parcel
Applies: Only one primary dwelling unit and one accessory dwelling unit is permitted per parcel, regardless of parcel size
§ 24-20 · code text
Table row “VLDR”, column “Max. [3]”: 1 unit per parcel

Uses in VLDR

Uses the code's use tables allow in VLDR, or allow with a permit. Each links to its page with the code section.

Not on this page

We did not find a general stories, side setback, rear setback, lot coverage, FAR limit for VLDR in the zoning tables we read. The code may still set one elsewhere — check the Butte County Municipal Code.

Other Butte County zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Butte County's VLDR zone?

35 ft — Butte County Municipal Code § 24-20.

What is the minimum front setback in Butte County's VLDR zone?

20 ft — Butte County Municipal Code § 24-20.

What is the minimum lot size in Butte County's VLDR zone?

1 acre (applies only to the creation of new parcels through the subdivision process) — Butte County Municipal Code § 24-20.

What is the maximum density in Butte County's VLDR zone?

1 unit per parcel (only one primary dwelling unit and one accessory dwelling unit is permitted per parcel, regardless of parcel size) — Butte County Municipal Code § 24-20.

General information, not legal advice.

Ask about a Butte County property in VLDR

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Butte County