Skip to content

Buellton · Zoning · RM

Buellton RM zoning: height, setbacks and lot size

In Buellton's RM zone, buildings can be up to 35 ft tall, the front setback is 20 ft and the minimum lot size is 10,000 sq. ft. (Buellton code, read October 2026).

Key points

  • Maximum building height: 35 ft
  • Minimum front setback: 20 ft
  • Minimum side setback: 10 ft
  • Minimum rear setback: 10 ft
  • Minimum lot size: 10,000 sq. ft.
  • Maximum lot coverage: 30% (dwellings)

RM is a zoning district in Buellton. Every value below was read from the Buellton Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in RM

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
35 ft
§ 19.02.120 · code text
Table row “Height limits”, column “RM”: 35 ft. maximum
Minimum front setback
20 ft
§ 19.02.120 · code text
Table row “Front”, column “RM”: 20 ft. minimum
Minimum side setback
10 ft
§ 19.02.120 · code text
Table row “Side”, column “RM”: 10 ft. minimum
Minimum rear setback
10 ft
§ 19.02.120 · code text
Table row “Rear”, column “RM”: 10 ft. minimum
Minimum lot size
10,000 sq. ft.
§ 19.02.120 · code text
Table row “Minimum lot area”, column “RM”: 10,000 sq. ft.
Maximum lot coverage
30%
Applies: dwellings
§ 19.02.120 · code text
Table row “Site coverage”, column “RM”: 30% of net site area for dwellings

Uses in RM

Uses the code's use tables allow in RM, or allow with a permit. Each links to its page with the code section.

Not on this page

We did not find a general stories, FAR, density limit for RM in the zoning tables we read. The code may still set one elsewhere — check the Buellton Municipal Code.

Other Buellton zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Buellton's RM zone?

35 ft — Buellton Municipal Code § 19.02.120.

What is the minimum front setback in Buellton's RM zone?

20 ft — Buellton Municipal Code § 19.02.120.

What is the minimum side setback in Buellton's RM zone?

10 ft — Buellton Municipal Code § 19.02.120.

What is the minimum rear setback in Buellton's RM zone?

10 ft — Buellton Municipal Code § 19.02.120.

What is the minimum lot size in Buellton's RM zone?

10,000 sq. ft. — Buellton Municipal Code § 19.02.120.

General information, not legal advice.

Ask about a Buellton property in RM

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Buellton