Skip to content

Arroyo Grande · Zoning · RH

Arroyo Grande RH zoning: height, setbacks and lot size

In Arroyo Grande's RH zone, generally buildings can be up to 30 ft (2 stories) tall, the front setback is 35 ft and the minimum lot size is 49,000 sq ft, with the conditions listed below (Arroyo Grande code, read October 2026).

Key points

  • Maximum building height: 30 ft (Accessory buildings are limited to 14 ft)
  • Maximum number of stories: 2 stories
  • Minimum front setback: 35 ft (New subdivisions of 5+ lots; infill and additions use this or the block average. Approved-project infill follows that project's setbacks.)
  • Minimum side setback: 10% of lot width (Infill in an approved project follows that project's setbacks if the city set them.)
  • Minimum rear setback: 40 ft (Infill in an approved project follows that project's setbacks if the city set them.)
  • Minimum lot size: 49,000 sq ft (New subdivisions)
  • Maximum lot coverage: 35%
  • Maximum density: 0.67 DU per gross acre

RH is a zoning district in Arroyo Grande. Every value below was read from the Arroyo Grande Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in RH

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
30 ft
Applies: Accessory buildings are limited to 14 ft
§ 16.32.050 · code text
Table row “10. Maximum height for buildings and structures”, column “RH”: 30′ or 2 stories, whichever is less, 14′ for accessory buildings.
Maximum number of stories
2 stories
§ 16.32.050 · code text
Table row “10. Maximum height for buildings and structures”, column “RH”: 30′ or 2 stories, whichever is less, 14′ for accessory buildings.
Minimum front setback
35 ft
Applies: New subdivisions of 5+ lots; infill and additions use this or the block average. Approved-project infill follows that project's setbacks.
§ 16.32.050 · code text
Table row “5. Minimum front yard * New subdivisions of 5+ lots”, column “RH”: 35′
Minimum side setback
10% of lot width
Applies: Infill in an approved project follows that project's setbacks if the city set them.
§ 16.32.050 · code text
Table row “6. Minimum interior side yard setback *”, column “RH”: 10% of lot width
Minimum rear setback
40 ft
Applies: Infill in an approved project follows that project's setbacks if the city set them.
§ 16.32.050 · code text
Table row “8. Minimum rear yard setback *”, column “RH”: 40′
Minimum lot size
49,000 sq ft
Applies: New subdivisions
§ 16.32.050 · code text
Table row “2. Minimum building site a (Net area in sq. ft.) new subdivisions”, column “RH”: 49,000
Maximum lot coverage
35%
§ 16.32.050 · code text
Table row “9. Maximum lot coverage d”, column “RH”: 35%
Maximum density
0.67 DU per gross acre
§ 16.32.050 · code text
Table row “1. Maximum density (DU's per gross acre)”, column “RH”: 0.67

Uses in RH

Uses the code's use tables allow in RH, or allow with a permit. Each links to its page with the code section.

Not on this page

We did not find a general FAR limit for RH in the zoning tables we read. The code may still set one elsewhere — check the Arroyo Grande Municipal Code.

Other Arroyo Grande zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Arroyo Grande's RH zone?

30 ft (accessory buildings are limited to 14 ft) — Arroyo Grande Municipal Code § 16.32.050.

What is the maximum number of stories in Arroyo Grande's RH zone?

2 stories — Arroyo Grande Municipal Code § 16.32.050.

What is the minimum front setback in Arroyo Grande's RH zone?

35 ft (new subdivisions of 5+ lots; infill and additions use this or the block average. Approved-project infill follows that project's setbacks) — Arroyo Grande Municipal Code § 16.32.050.

What is the minimum side setback in Arroyo Grande's RH zone?

10% of lot width (infill in an approved project follows that project's setbacks if the city set them) — Arroyo Grande Municipal Code § 16.32.050.

What is the minimum rear setback in Arroyo Grande's RH zone?

40 ft (infill in an approved project follows that project's setbacks if the city set them) — Arroyo Grande Municipal Code § 16.32.050.

General information, not legal advice.

Ask about an Arroyo Grande property in RH

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Arroyo Grande