Skip to content

Antioch · Zoning · M-1

Antioch M-1 zoning: height, setbacks and lot size

In Antioch's M-1 zone, buildings can be up to 45 ft tall and the minimum lot size is 40,000 sq ft (Antioch code, read October 2026).

Key points

  • Maximum building height: 45 ft
  • Minimum side setback: 0 ft
  • Minimum rear setback: 0 ft
  • Minimum lot size: 40,000 sq ft
  • Maximum lot coverage: 50%
  • Maximum density: 0 units per acre (The table assigns no residential density to this zone.)

M-1 is a zoning district in Antioch. Every value below was read from the Antioch Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in M-1

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
45 ft
§ 9-5.601 · code text
Table row “M-1”, column “Maximum Height Feet b”: 45
Minimum side setback
0 ft
§ 9-5.601 · code text
Table row “M-1”, column “Minimum Side Yard Required in Feet e”: 0 ft.
Minimum rear setback
0 ft
§ 9-5.601 · code text
Table row “M-1”, column “Minimum Rear Yard Required in Feet”: 0 ft.
Minimum lot size
40,000 sq ft
§ 9-5.601 · code text
Table row “M-1”, column “Minimum Building Site Sq. Ft.”: 40,000
Maximum lot coverage
50%
§ 9-5.601 · code text
Table row “M-1”, column “Maximum Lot Coverage”: 50%
Maximum density
0 units per acre
Applies: The table assigns no residential density to this zone.
§ 9-5.601 · code text
Table row “M-1”, column “Maximum Density Allowed Units Per Gross Developable Acre d”: 0

Uses in M-1

Uses the code's use tables allow in M-1, or allow with a permit. Each links to its page with the code section.

Not on this page

We did not find a general stories, front setback, FAR limit for M-1 in the zoning tables we read. The code may still set one elsewhere — check the Antioch Municipal Code.

Other Antioch zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Antioch's M-1 zone?

45 ft — Antioch Municipal Code § 9-5.601.

What is the minimum side setback in Antioch's M-1 zone?

0 ft — Antioch Municipal Code § 9-5.601.

What is the minimum rear setback in Antioch's M-1 zone?

0 ft — Antioch Municipal Code § 9-5.601.

What is the minimum lot size in Antioch's M-1 zone?

40,000 sq ft — Antioch Municipal Code § 9-5.601.

What is the maximum lot coverage in Antioch's M-1 zone?

50% — Antioch Municipal Code § 9-5.601.

General information, not legal advice.

Ask about an Antioch property in M-1

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Antioch