Alpine County · Zoning · IND
Alpine County IND zoning: height, setbacks and lot size
In Alpine County's IND zone, buildings can be up to 45 ft tall, the front setback is 20 ft and the minimum lot size is 1 acre (Alpine County code, read October 2026).
Key points
- Maximum building height: 45 ft
- Minimum front setback: 20 ft
- Minimum side setback: None required (50 ft when abutting another zone)
- Minimum rear setback: None required (50 ft when abutting another zone)
- Minimum lot size: 1 acre
IND (IND INDUSTRIAL ZONE) is a zoning district in Alpine County. Every value below was read from the Alpine County Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in IND
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 45 ft § 18.48.050 · code textThe maximum height shall be forty-five feet. |
|---|---|
| Minimum front setback | 20 ft § 18.48.040 · code textB. Front yard: twenty feet; |
| Minimum side setback | None required Applies: 50 ft when abutting another zone § 18.48.040 · code textC. Side yards: None, except when abutting another zone, then not less than fifty feet; |
| Minimum rear setback | None required Applies: 50 ft when abutting another zone § 18.48.040 · code textD. Rear yard: None, except when abutting another zone, then not less than fifty feet. |
| Minimum lot size | 1 acre § 18.48.040 · code textA. Lot area: one acre; |
When a different number applies
The code sets other values for particular lots, buildings or locations in IND:
- Minimum side setback: 50 ft — when abutting another zone § 18.48.040
- Minimum rear setback: 50 ft — when abutting another zone § 18.48.040
Not on this page
We did not find a general stories, lot coverage, FAR, density limit for IND in the zoning tables we read. The code may still set one elsewhere — check the Alpine County Municipal Code.
Other Alpine County zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Alpine County's IND zone?
45 ft — Alpine County Municipal Code § 18.48.050.
What is the minimum front setback in Alpine County's IND zone?
20 ft — Alpine County Municipal Code § 18.48.040.
What is the minimum side setback in Alpine County's IND zone?
None required (50 ft when abutting another zone) — Alpine County Municipal Code § 18.48.040.
What is the minimum rear setback in Alpine County's IND zone?
None required (50 ft when abutting another zone) — Alpine County Municipal Code § 18.48.040.
What is the minimum lot size in Alpine County's IND zone?
1 acre — Alpine County Municipal Code § 18.48.040.
General information, not legal advice.
Ask about an Alpine County property in IND
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question