Santa Ana Municipal Code § 8-620 Reserved

There is adopted by the city that certain code known as the California Mechanical Code, 2025 edition (hereinafter referred to in this article as the "California Mechanical Code" "Mechanical Code" or "mechanical code"), together with subsequent supplements, amendments, or editions, which shall become effective, adopted, and incorporated by reference into this Code on the date specified by the state building standards commission, unless otherwise specified. The mechanical code is adopted and incorporated by reference as though fully set forth at length herein as provided for in section 419 of the Charter of the city, except for the changes to the mechanical code set forth in this chapter of this Code that specifically amend the mechanical code. Any previously enacted, unrepealed provision of this Code that amended a pre-2025 edition of the "Mechanical Code" shall also be construed as amending the applicable provision of the 2025 or later edition of the mechanical code. The mechanical code as amended, together with all other provisions of this article, shall be known as the city mechanical code.

(Ord. No. NS-1006, § 24A, 4-6-70; Ord. No. NS-1147, § 28, 11-6-72; Ord. No. NS-1211, § 1, 7-1-74; Ord. No. NS-1415, § 1, 4-17-78; Ord. No. NS-1577, § 1, 4-20-81; Ord. No. NS-1810, § 1, 11-18-85; Ord. No. NS-1902, § 1, 6-1-87; Ord. No. NS-2077, § 1, 9-17-90; Ord. No. NS-2182, § 18, 1-19-93; Ord. No. NS-2273, § 25, 12-18-95; Ord. No. NS-2522, § 37, 2-3-03; Ord. No. NS-2760, § 34, 12-3-07; Ord. No. NS-2810, § 33, 11-15-10; Ord. No. NS-2851, § 28, 11-18-13; Ord. No. NS-2905, § 7, 12-6-16; Ord. No. NS-2981, § 6, 12-17-19; Ord. No. NS-3032, § 6, 12-20-22; Ord. No. NS-3088, § 8, 1-20-26)

Editor's note— Ord. No. NS-2810, §§ 34—37, adopted November 15, 2010, repealed the former sections 8-557—8-560 in their entirety, which pertained to permits; required (appendix chapter 1, section 112.1), violations and penalties (appendix chapter 1, section 111.0), and fees (appendix chapter 1, section 115 and table no. 1-1), respectively, and derived from Ord. No. NS-1596, § 5, adopted September 8, 1981; Ord. No. NS-1810, §§ 2, 3, adopted November 18, 1985; Ord. No. NS-2077, §§ 2—4, adopted September 17, 1990; Ord. No. NS-2182, § 19, adopted January 19, 1993; Ord. No. NS-2273, §§ 26—28, adopted December 18, 1995, and Ord. No. NS-2760, §§ 35—37, adopted December 3, 2007.

Editor's note— Ord. No. NS-2077, § 6, adopted Sept. 17, 1990, in part repealed §§ 8-561—8-563, which amended Sections 1105(a), 503(c) and 2214 of the mechanical code and derived from Ord. No. NS-1902, §§ 2—4, adopted June 1, 1987.

Editor's note— Ord. No. NS-2981, § 7, adopted December 17, 2019, repealed § 8-570. Former § 8-570 pertained to ducts—material (section 602.1) and derived from Ord. No. NS-2182, § 20, adopted January 19, 1993; Ord. No. NS-2273, § 30, adopted December 18, 1995; Ord. No. NS-2522, §§ 38, 39, adopted February 3, 2003; Ord. No. NS-2760, § 40, adopted December 3, 2007; Ord. No. NS-2810, § 39, adopted November 15, 2010; and Ord. No. NS-2851, § 30, adopted November 18, 2013.

Editor's note— Ord. No. NS-2077, § 6, adopted Sept. 17, 1990, repealed § 8-610, which pertained to location of cooling equipment (Section 1202 of the mechanical code) and derived from Ord. No. NS-1006, § 29, adopted Apr. 6, 1970, and Ord. No. NS-1211, § 1, adopted July 1, 1974.

Editor's note— Ord. No. NS-2077, § 6, adopted Sept. 17, 1990, repealed § 8-620, which pertained to location of evaporative cooling systems (Section 1302 of the mechanical code) and derived from Ord. No. NS-1006, § 30, adopted Apr. 6, 1970, and Ord. No. 1211, § 1, adopted July 1, 1974.

Editor's note— Ord. No. NS-2077, § 6, adopted Sept. 17, 1990, repealed § 8-630, which pertained to location of absorption refrigerating equipment (Section 1404 of the mechanical code) and derived from Ord. No. NS-1006, § 31, adopted Apr. 6, 1970, and Ord. No. NS-1211, § 1, adopted July 1, 1974.