Rocklin Municipal Code Ch. 17.56 M-2 Zone

The following are permitted in the M-2 zone provided in the opinion of planning department staff, there is no appreciable offensive or objectionable odor, dust, noise, bright lights, vibration, or other nuisance factors:

A. Industrial uses as authorized and regulated in the M-1 zone;

B. Wholesale stores and storage;

C. Service establishments;

D. Manufacturing and fabrication;

E. Processing and assembly uses;

F. Mini-storage.

(Ord. 362 (part): Ord. 336 § 6.24.000, 1977).

The following uses are permitted in the M-2 zone subject to the issuance of a conditional use permit:

A. Any use specified in Section 17.54.010 or 17.56.010 which in the opinion of planning department staff does not qualify as a permitted use because of some objectional factor;

B. Auto dismantling;

C. Bituminous paving plants;

D. Batch plants, concrete;

E. Flammable liquid storage;

F. Storage of petroleum;

G. Retail sales and personal service establishments appurtenant to permitted or conditional uses;

H. Industrial cluster complex;

I. Auto body and paint shops;

J. Automobile repair shop (light);

K. Automobile repair shop (heavy);

L. Churches;

M. Mobile pushcart vending facility.

(Ord. 674 § 9, 1993; Ord. 669 § 4, 1992; Ord. 650 § 11, 1991: Ord. 581 § 33, 1988; Ord. 391 (part): Ord. 336 § 6.24.010, 1977).

Height regulations in the M-2 zone:

The maximum height for principal buildings and structures shall be thirty feet, and the maximum number of stories shall be two, with the following exception:

With a use permit the maximum allowable height may be increased up to fifty feet, and the maximum number of stories may be increased up to four.

(Ord. 555 § 8, 1986: Ord. 336 § 6.24.020, 1977).

The minimum area for each lot in the M-2 zone shall be one acre.

(Ord. 336 § 6.24.030, 1977).

The maximum lot coverage by all structures and buildings in the M-2 zone shall not exceed fifty percent of the lot area.

(Ord. 543 § 2, 1986: Ord. 336 § 6.24.040, 1977).

The minimum lot width in the M-2 zone shall be two hundred feet.

(Ord. 336 § 6.24.050, 1977).

No building or structure shall hereafter be erected or enlarged in the M-2 zone unless the following setbacks are provided and maintained:

A. Front. There shall be a front setback of not less than twenty-five feet.

B. Rear. There shall be a rear setback of not less than ten feet.

C. Interior Side. There shall be an interior side setback of not less than five feet.

D. Street Side. There shall be a street side setback of not less than ten feet.

E. Specified Streets. Front, side, street side, or rear setbacks required for lots abutting a highway or street for which rights-of-way are established by the circulation element of the general plan shall be measured from the adopted plan line or the property line, whichever provides the greater setback.

(Ord. 336 § 6.24.060, 1977).

Off-street parking shall be provided in the M-2 zone subject to the regulations in Chapter 17.66.

(Ord. 336 § 6.24.070, 1977).

No area shall be zoned to the M-2 heavy industrial zone unless the following minimum area, depth, and width requirements of the zone are provided:

A. Minimum zone area: one acre;

B. Minimum width: two hundred feet;

C. Minimum lot depth: two hundred feet.

(Ord. 336 § 6.24.080, 1977).