Chapter 12.08.18

B – COMBINING (OR SPECIAL RESIDENTIAL USE) ZONE DISTRICT

REGULATIONS

The B zone is intended to provide for specified maximum number of residential dwellings in the C-1 zone. Within the B zone, all uses of land shall comply with the regulations of the C-1 zone and with the additional regulations of the B zone. In no case shall the B zone allow a reduction of a minimum lot size below that required or increase the maximum permitted density above that required in the development standards of the C-1 zone with which it is combined. For the purpose of this Chapter, density shall mean the maximum number of dwelling units permitted per lot. In accordance with state law, an accessory and junior accessory dwelling unit that conforms to Part 12.08.4-11 shall be deemed to be an accessory use or an accessory building and shall not be considered to exceed the allowable density for the lot upon which it is located, and shall be deemed to be a residential use that is consistent with the existing general plan and zoning designations for the lot.

Residential uses not to exceed one single-family residential use per lot. In accordance with state law, an accessory and junior accessory dwelling unit that conforms to Part 12.08.4-11 shall be deemed to be an accessory use or an accessory building and shall not be considered to exceed the allowable density for the lot upon which it is located, and shall be deemed to be a residential use that is consistent with the existing general plan and zoning designations for the lot.

.

123

Loyalton City Zoning Ordinance No. 424

This page is left intentionally blank.

124

Loyalton City Zoning Ordinance No. 424