Local jurisdiction · San Benito County
Hollister Zoning, Planning & Building Codes
What you can build in Hollister depends on its local zoning and planning code, layered on the California Building Standards Code. Ask GoCodebook about any Hollister address.
Key points
Hollister is a city in San Benito County, California. Like every California jurisdiction, Hollister regulates development through a local zoning and planning code (often Title 17 Zoning) — the rules that determine allowed uses, setbacks, height limits, FAR, density and parking — on top of the statewide California Building Standards Code (Title 24).
Those local rules change at the city line, so a remodel, ADU or use that is allowed nearby may be restricted in Hollister. GoCodebook reads the Hollister ordinance with state code and answers your zoning, planning or permit question with the controlling citation.
Zoning & planning in Hollister
Hollister's zoning code (often Title 17 Zoning) assigns each parcel to a district (residential, commercial, industrial, mixed-use and overlays) that sets the allowed uses, setbacks, height, FAR, lot coverage and density. Conditional uses, variances and design review may require discretionary planning approval.
Ask GoCodebook "what's the zoning for [address] in Hollister?", "what setback / FAR applies?", or "can I build an ADU or addition here?" and get a cited answer. See coverage.
Building permits & remodeling in Hollister
Construction and remodeling in Hollister must comply with the adopted Building, Residential, Electrical, Plumbing, Energy and Fire codes, plus any Hollister local amendments — and most work needs a building permit.
Additions, remodels and change-of-use can trigger extra requirements (accessibility, energy upgrades, fire). GoCodebook flags what applies to your Hollister project before you apply.
Where to read the Hollister code
The Hollister municipal and zoning code is published on Municode — view the official Hollister code library. That lets you read the ordinance section by section.
GoCodebook goes beyond browsing Municode (see how they compare): it reads the Hollister ordinance together with the California Building Standards Code and answers your question — zoning, setbacks, FAR, height, ADUs, permits — with the controlling citation for your parcel.
ADUs, housing & tenant rules in Hollister
California's statewide ADU laws override many local restrictions, so Hollister must allow accessory dwelling units that meet state size, setback and parking standards. Rentals may also be subject to rent control and AB 1482 protections.
Whether a specific Hollister property is covered depends on its zoning, age and ownership — exactly the kind of question GoCodebook answers with a citation.
Who this affects
Frequently asked questions
What is the zoning code for Hollister?
Hollister adopts a local zoning ordinance (often Title 17 Zoning) that sets allowed uses, setbacks, height, FAR and density by district, published on Municode, alongside the California Building Standards Code. Ask GoCodebook for your parcel's zoning and what it allows.
What are the setback and FAR rules in Hollister?
Setbacks, floor-area ratio (FAR), height and lot coverage in Hollister are set by your parcel's zoning district. GoCodebook returns the exact standards for your address with a citation.
Do I need a permit to remodel or build in Hollister?
Most new construction, additions and many remodels in Hollister require a building permit and must meet the adopted Title 24 codes plus local amendments. GoCodebook tells you what applies before you apply.
Can I build an ADU in Hollister?
Generally yes — California's statewide ADU law requires Hollister to permit ADUs that meet state standards, even where local rules are stricter.
Ask about any Hollister property
Get a cited, plain-English answer on Hollister zoning, setbacks, FAR, ADUs, remodels and permits — for any address.
Start Free Trial